Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
 

Resene special purpose product range

Resene manufactures an extensive range of paints, stains and coatings suitable for a myriad of residential, commercial and industrial applications. A brief summary of the main product lines are contained in this section - scroll down through the special purpose product range or choose other product ranges from the menu below. Note that you can click on the icon of the paint tin/container to zoom and/or to download that image/s. For information on how to paint your home click here or watch our handy how to videos. For colour options view Resene Colour Charts or the Online Colour Library.

Note that you can click on the icon of the paint tin/container to zoom and/or to download that image/s. Alternatively, download the full image set (41.4 MB) of paint tins/containers available for this range.

 

Search the entire Resene product range...

 
 

Special purpose products

Resene range

Resene Art Action Art & Poster Paint

Resene Art Action Art & Poster Paint
Eco Choice approved Eco Choice approved

Resene Art Action Art & Poster Paint is a permanent, durable acrylic paint designed specifically for general use in home, classroom and business artwork. Suitable for use by both children and adults. If a higher quality paint is required, use Resene Art Action Student Acrylic. Resene Art Action Tempera is recommended for younger children.

Resene Art Action Clear - gloss, satin and flat

Resene Art Action Clear – gloss, satin, flat
Eco Choice approved Eco Choice approved

Resene Art Action Clear is a waterborne clear designed to provide a protective layer over your artwork, or use direct over concrete for a natural look. Available in gloss, satin and flat.

Resene Art Action Tempera

Resene Art Action Student Acrylic
Eco Choice approved Eco Choice approved

Resene Art Action Student Acrylic is a high quality, permanent, durable acrylic paint designed for home, classroom and business artwork. Suitable for use by both children and adults. Resene Art Action Tempera is recommended for younger children.

Resene Art Action Tempera

Resene Art Action Tempera
Eco Choice approved Eco Choice approved

Resene Art Action Tempera is designed specifically for use on home or classroom artwork. Ideal for younger children (3 years or older). A good value option for non-permanent artwork, posters and pictures that will be protected from moisture. If a higher quality, more permanent paint is required, use Resene Art Action Student Acrylic.

Resene Brushing Additive

Resene Brushing Additive

Resene Brushing Additive is specially formulated for addition to Resene waterborne enamel paints to reduce brush marking and produce a smoother finish on trim and joinery. Warm, dry conditions and hot surfaces result in too rapid drying of waterborne paints. This may lead to excessive foaming on application and generally poor application properties such as short wet edge times and impaired levelling. Resene Brushing Additive additions of 2%-5% will generally improve most application problems caused by too rapid drying. In more severe cases more Resene Brushing Additive is beneficial. Do not use more than 5% (200ml per 4 litres). Do not use with Resene Hot Weather Additive.

Typical uses: In Resene Lustacryl and Resene Enamacryl when brush applied onto trim and joinery.

Resene FX Crackle
Resene Crackle Effect

Resene FX Crackle
crackle effects finish - interior

Creating unique broken, antique looking finishes is quick and easy with Resene FX Crackle. Distinctive crackle finishes can be created using a tinted acrylic basecoat (such as Resene Lumbersider), one coat of Resene FX Crackle and a final coat of an acrylic topcoat tinted to a contrasting colour to the basecoat. Resene FX Crackle will shrink causing the acrylic topcoat to crack revealing the basecoat colour. The Crackle effect will vary depending on the application method, enabling many different effects to be achieved with the same product, just by varying application technique and the basecoat and topcoat colour combinations. A thick coat of Resene FX Crackle will result in fewer larger, deeper cracks, while a thin coat will give smaller, shallower cracks. Crackle effect finishes are best used on uneven or rough walls, furniture, picture frames, woodwork and small feature areas. As with other effects products, agree a sample panel before the job starts and use this as the standard for the project.

If you wish to overcoat a Resene FX Crackle finish with an acrylic paint you will need to apply Resene Sureseal to seal off the crackle layer before topcoating. Depending upon the depth of the crackle finish you may still see a pattern through the repainted area.

Typical uses: Small areas where a crackle effect finish is required. Not recommended for large areas as it is difficult to get an even finish on a larger area.

Resene FX Magnetic Magic

Resene FX Magnetic Magic
magnetic effect finish - interior - waterborne

Resene FX Magnetic Magic is a premium waterborne paint formulated with iron oxides for maximum magnetic effect. Overcoat with your choice of Resene topcoats in over 3000 Resene colours. Magnets can be hung directly onto the finished area once dry and cured. To hang a poster, picture or photo from your magnetic area, use self-adhesive magnetic strips applied to the back of the item. The weight of the item will determine the number and placement of the magnets. For maximum magnetic strength use high quality magnets.

Typical uses: Smooth, non-textured interior areas where it is desired to affix magnets.

Resene Hot Weather Additive

Resene Hot Weather Additive

Resene Hot Weather Additive is specially formulated to retard the dry of Resene waterborne paints. Warm, dry conditions and hot surfaces result in too rapid drying of waterborne paints. This may lead to excessive foaming on application and generally poor application properties such as short wet edge times and impaired levelling. Resene Hot Weather Additive additions of 2%-5% will generally improve most application problems caused by too rapid drying. In more severe cases more Resene Hot Weather Additive is beneficial. Do not use more than 10% (400ml per 4 litres). Do not use with Resene Brushing Additive.

Typical uses: In Resene waterborne paints to slow drying.

Resene MPS Stainers

Resene Master Painters Stainers (also known as Resene MPS Stainers)

Resene Master Painters Stainers are multi-purpose no added VOC colourants that have been tested for use in all Resene decorative undercoats and topcoats. This enables colours to be tinted without adding unwanted VOCs. Primarily used by professional painters to add a touch of colour to white products.

Resene Quick2Clean Paint Equipment – coming soon

Resene Quick2Clean Paint Equipment is designed to make cleaning spray equipment quick and easy to help you maintain and maximise the life of your spray gear. It is also suitable as a conditioner for brushes used with waterborne paints to help you care for your brushes.

Typical uses: designed for spray equipment and as a brush conditioner for waterborne paints.

Summit Roof Commercial Building Additive

Resene Summit Roof Commercial Brushing Additive
exterior

Resene Summit Roof Commercial Brushing Additive must be used with Resene Summit Roof Commercial Spray Satin on small areas when applied by brush before the roof is sprayed. Add 30ml of Resene Summit Roof Commercial Brushing Additive per litre of Resene Summit Roof Commercial Spray Satin. The additive adds ‘bulk’ to Resene Summit Roof Commercial. Resene Summit Roof Commercial has been developed without compromise for airless spraying. This has meant how well it brushes or rolls has been compromised. The additive effectively adds the ‘brushing ingredients’ back to the paint. If you need to brush small areas, decant the amount of paint needed into a separate can and add the Resene Summit Roof Commercial Brushing Additive and use.

Resene Summit Roof Spray Additive

Resene Summit Roof Spray Additive

Resene Summit Roof Spray Additive is specially formulated to extend open time, improve flow and levelling, and to achieve an integrated paint film when Resene Summit Roof paint is airless spray applied to an existing dark roof paint colour or when the surface is too hot to touch.

Resene TagCover

Resene TagCover
quick and easy graffiti cover paint - exterior/interior - waterborne
Eco Choice approved Eco Choice approved

Resene TagCover is a custom made range of waterborne satin paints formulated to provide a budget friendly paint system to cover graffiti. Available in a standard colour range in 10L pails. Other sizes and colours available on request. Minimum quantities may apply.

Typical uses: Concrete, plaster, timber.

Resene Umbrella Additive

Resene Umbrella Additive

Resene Umbrella Additive is an additive for exterior waterborne coatings providing rapid protection from showers and light rain even before the coating has dried. Once applied, a coating containing Resene Umbrella Additive quickly starts to build a protective shell that then extends throughout the whole coating. Water is able to evaporate from the coating allowing it to dry but showers and light rain simply roll off leaving the still-drying coating firmly attached to the substrate. The Umbrella Effect will work in light showers only. Exterior painting should not be undertaken when medium or heavy rain is expected during the paint’s drying phase.

Wintergrade Additive

Resene Wintergrade Additive

Resene Wintergrade Additive is an additive for exterior waterborne coatings providing extra protection against paint application in colder temperatures, so you can apply treated paint in temperatures down to 3?C.

Cold conditions can cause standard waterborne paint films to crack or powder and lead to premature paint failure. When using paint over winter, keep an eye on the temperature, both on the surface and in the air. Remember a surface can be a lot colder than the air that surrounds it so you may find it’s best to change your order of work and work on surfaces like plasterboard in the early morning and move to areas like concrete, which tend to be cooler in cold weather until they have had a chance to warm up a little.


Special purpose products

Optimising additives:

Resene Bug Juice™

Bug Juice™

Bug Juice™ is an insecticide paint additive designed to eliminate crawling and flying insects on interior and exterior surfaces. It is a contact pesticide and it begins to work after an insect makes contact with the treated surface.

Resene Fly Deterrent Additive

Resene Fly Deterrent

Resene Fly Deterrent reduces the appearance of fly spots by discouraging flies from landing on painted surfaces.

Resene MoulDefender Additive

Resene MoulDefender

Resene MoulDefender is a fungicidal additive designed to be added to waterborne paint at the point of sale when a particular need for extra protection against mould is identified. Suitable for use inside and out and ideal for wet areas such as kitchens, bathrooms and laundries, Resene MoulDefender will slow down the reappearance of mould. Essentially Resene MoulDefender acts as a mould protection booster shot in your paint.


Special purpose products

Crown range:

Crown Landscape

Crown Landscape – Black, Cedar, Kauri
Eco Choice approved Eco Choice approved

Crown Landscape is a waterborne stain designed to enhance, protect and rejuvenate exterior timber in landscaping, such as fences, retaining walls and decorative landscaping features. Available in three colours – Black, Cedar and Kauri.

Crown

Crown
Eco Choice approved Eco Choice approved

Crown products with Eco Choice approval are: Crown Fence Paint, Crown Acrylic Gloss Acrylic, Crown Low Sheen Acrylic, Crown Roof, Crown Timber Colour, Crown Acrylic Wallboard Sealer.

Crown is a range of good quality topcoats and primers/sealers designed for budget conscious homeowners and trade customers. Resene premium paints will provide the best long term value, however the Crown range can be ideal where there is a limited budget available.

Crown roof paints are designed to give a quick drying, durable, high-gloss finish on new primed or previously painted roofs. Good surface preparation is critical to maximise the life of your roof paint system. Clean down all surfaces using Resene Roof and Metal Wash, a concentrated pre-treatment for all new and old unpainted galvanised roofing and a general cleaner for previously painted surfaces including roofing. Wash down with a copious amount of freshwater.

Prime the substrate using:

  1. Resene Galvo One Galvanised Iron Primer is a fast drying, anti-corrosive primer that welds itself to new or old (even lightly corroded) galvanised iron, providing an ideal surface for topcoating. Resene Galvo One is also recommended for use over aluminium. Overcoat within three months of application.
  2. Resene Galvo-Prime Waterborne Galvanised Iron Primer is ideal for use on new galvanised iron or Zincalume. If the substrate is weathered, use only Resene Galvo One.
  3. Resene Rust-Arrest Anti-Corrosive Primer has been designed specifically for red rust problems.
  4. Resene Vinyl Etch Metal Primer is ideal for professional application to galvanised iron, aluminium roofs and sidings and all non-ferrous surfaces.

Use Resene Membrane Roofing Primer for all sheet rubber roofing systems and bituminous surfaces.

Handy tip: A good rule-of-thumb for calculating the quantity of roof paint required is: your project's footprint area plus about 40% (allows for roof pitch, corrugations, soffit overhang, etc). Trough section roofing can require significantly more. Typically a complete roof paint system requires surface preparation using Resene Roof Wash and Paint Cleaner, one coat of primer and two coats of topcoat at the recommended coverage rate on the cans.


Special purpose products

Resene Decorator range:

Decorator

Resene Decorator is a range of trade products, from high gloss to ultra low sheen, including a range of primers and sealers designed for professional trade use. For more information contact your Resene ColorShop or representative.

Prep/sealers/primers/undercoats:  Waterborne | Solventborne

Topcoats:  Pigmented | Soventborne | Urethane, Solventborne

Prep/sealers/primers/undercoats - waterborne

 

Resene Decorator Acrylic Primer Undercoat
exterior/interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Acrylic Primer Undercoat provides long term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. Dries in only 20 minutes and can be recoated in two hours. May be topcoated with waterborne or solventborne systems.

Typical uses: Block and brickwork, cement plaster, cloth/woven wallcoverings, composite and fibre board, repaints, timber, wallboards, wallpaper.

 

Resene Decorator Acrylic Sealer Undercoat
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Acrylic Sealer Undercoat is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent holdout of topcoats. Very good opacity.

Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard.

 

Resene Decorator Easy Sand Acrylic Wallboard Sealer
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Easy Sand Acrylic Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Easily sanded.

Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard.

 

Resene Decorator First2Finish
interior - waterborne – trade only

Resene Decorator First2Finish is a waterborne finish designed to save you time and money and is ideally suited to group housing type projects. It dries to a very smooth even finish, but can also be back rolled if a slight texture is required (to disguise surface imperfections etc). Once proficient in its use it's expected a professional painter could shave 10% off the time needed to finish a new home interior.

Typical uses: On plasterboard, MDF and pine skirting boards, door and window frames.

Recommended process for new work:

  1. Mask windows, light fittings etc, remove or mask doors.
  2. Spray Resene Decorator First2Finish onto skirting boards, door and window frames, plasterboard walls and ceilings, @ approx.120-150 microns.
  3. De-nib ceilings if needed.
  4. Spray topcoat to ceilings.
  5. De-nib walls, frames, skirting boards etc.
  6. Spray Resene Lustacryl (Commercial or Standard) to skirtings and frames.
  7. Brush and roll topcoats to walls (Resene Zylone Sheen, Resene SpaceCote, Resene Decorator wall paints).

Resene Decorator First2Finish is not designed to be easy to sand. De-nib within 24 hours only. No other sanding should be needed. De-nibbing is running the sandpaper once or twice over the surface to remove any small bumps.

Recommended spray set-up: Use a 516 FFLP tip, which achieves a finer atomisation than the 517 LP tip, which could also be used but will result in more product being applied per square metre. Run the Graco 495 between 2000 and 2200 psi (pressure setting).

 

Resene Decorator High Cover Acrylic Wallboard Sealer
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator High Cover Acrylic Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent coverage with good sanding abilities.

Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard.

Prep/sealers/primers/undercoats - solventborne

 

Resene Decorator Alkyd Undercoat
exterior/interior - solventborne – trade only

Resene Decorator Alkyd Undercoat All Purpose is a blend of special alkyd resins balanced with unique pigments, making it an easy brushing hard drying undercoat with exceptional sanding properties. Designed with a low sheen that allows exceptional enamel holdout. Suitable for overcoating by most Resene finishing systems.

Typical uses: Bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard, suitably primed metals, timber – architraves, doors, skirtings, window frames, wallboards, weatherboards, all exterior and interior prepared surfaces.

 

Resene Decorator Alkyd Undercoat 100
exterior/interior – solventborne – trade only

Resene Decorator Alkyd Undercoat 100 All Purpose is a blend of special solventborne resins balanced with unique pigments, making it an easy brushing hard drying undercoat with exceptional sanding properties. Suitable for overcoating by most Resene finishing systems.

Typical uses: Bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard, suitably primed metals, timber – architraves, doors, skirtings, window frames, wallboards, weatherboards, all exterior and interior prepared surfaces.

 

Resene Decorator Alkyd Wood Primer
exterior/interior - solventborne – trade only

Resene Decorator Alkyd Wood Primer is based on an oil modified alkyd resin blended with pigments to give ease of application and good adhesion to substrates. Flexible and produces an ideal surface for subsequent paint finishes. Excellent adhesion to timber and old paint (ideal for spot priming on repaint work). Built in resistance to mould and nail head corrosion. Unsuitable for priming Matai, Spotted Gum and Totara – use only Resene Decorator Acrylic Primer Undercoat.

Typical uses: Doors, outdoor furniture, timber, weatherboards, window frames.

 

Resene Decorator Fast Dry Alkyd Primer Undercoat
interior - solventborne – trade only

Resene Decorator Fast Dry Alkyd Undercoat is designed to be a fast drying solventborne undercoat to ready a surface for topcoating. Suitable for overcoating by most Resene finishing systems.

Typical uses: Interior surfaces that have been appropriately prepped/primed/sealed.

 

Resene Decorator Interior Pigmented Sealer/Undercoat
interior – solventborne – trade only

Resene Decorator Interior Pigmented Sealer/Undercoat is a pigmented, solventborne, alkali-resistant, penetrating sealer with the ability to penetrate and bond old decayed or stained surfaces and make them ready for painting.

Typical uses: Chalky and powdery surface, fibre cement, paperfaced plasterboard, plaster – gypsum and solid.

Topcoats - pigmented

 

Resene Decorator 100% Acrylic Gloss
exterior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator 100% Acrylic Gloss is based on a 100% acrylic emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces.

Typical uses: Aluminium, brickwork, concrete block, fibre cement, galvanised steel roofing and cladding, plywood, repaints, roughcast/stucco, timber, UPVC surfaces, weatherboards.

 

Resene Decorator Acrylic Ceiling Flat
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Ceiling Flat is recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. For use in dry areas.

Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

 

Resene Decorator Acrylic IE Flat
exterior/interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Acrylic IE Flat is a well proven blend of resins and pigments that combined produces a very flat film. Its ease of application makes it an excellent choice for decorating.

Typical uses: Interior – Fibre and particle board, fibrous plaster, paperfaced plasterboard, wallboards, Wallpaper; Exterior – Blockwork, brickwork, cement plaster, concrete, fibre cement, roughcast/stucco.

 

Resene Decorator Acrylic Low Sheen
exterior/interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Acrylic Low Sheen is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for both interior and exterior use.

Typical uses: Interior – Beams, fibre and particle board, wallboards, wallpaper; Exterior – Blockwork, brickwork, concrete and plaster, fibre cement, primed galvanised steel, repaints, timber.

 

Resene Decorator Acrylic Semi-Gloss
exterior/interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Acrylic Semi-Gloss is a combination of top quality acrylic emulsions blended with high grade pigment dispersions. Has a proven record of exposure on concrete buildings.

Typical uses: Blockwork, brickwork, cement plaster, concrete, fibre cement, roughcast/stucco.

 

Resene Decorator Interior Ultra Low Sheen
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Interior Ultra Low Sheen is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Drying to an attractive ultra low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use.

Typical uses: Beams, fibre and particle board, wallboards, wallpaper.

 

Resene Decorator Hi-Opacity Ceiling Flat
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Hi-Opacity Ceiling Flat recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. Hi-opacity, clean white. For use in dry areas.

Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

 

Resene Decorator Hi-Op EasyTouch Dead Flat Ceiling Paint
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Hi-Op EasyTouch Dead Flat Ceiling Paint is recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. For use in dry areas. Easy to touch up if required.

Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

 

Resene Decorator Interior Low Sheen
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Acrylic Low Sheen is based on a 100% acrylic low odour resin and has been formulated specifically for easy application. This results in an attractive and washable low sheen finish ideal for the majority of interior surfaces.

Typical uses: Beams, fibre and particle board, wallboards, wallpaper.

 

Resene Decorator Tintable Ceiling Flat
interior – waterborne – Eco Choice approved Eco Choice approved – trade only

Resene Decorator Tintable Ceiling Flat recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Tinter controlled for accurate colour results. For use in dry areas.

Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints.

Topcoats - solventborne

 

Resene Decorator Alkyd Flat
interior – solventborne – trade only

Resene Decorator Alkyd Flat is a flat enamel finish for use on suitably primed and sealed interior surfaces. Matches full gloss enamel in surface toughness, steam and scrub resistance.

Typical uses: Bedrooms, ceilings, composite board, fibrous plaster, hallways, hardboard, lounges, paperfaced plasterboard, walls.

 

Resene Decorator Alkyd Gloss
exterior/interior - solventborne – trade only

Resene Decorator Alkyd Gloss is a hardwearing, lead-free gloss enamel based on a flexible alkyd resin for fast drying and maximum durability on suitably prepared interior and exterior surfaces. Durability and gloss retention is typical of high quality gloss enamels.

Typical uses: Architraves/skirtings, bathrooms, composite board, furniture, kitchens, laundries, plywood, repaints, suitably primed metals, timber doors, wallboards, window frames.

 

Resene Decorator Alkyd Satin
interior – solventborne – trade only

Resene Decorator Alkyd Satin is a satin enamel finish for use on suitably primed and sealed interior surfaces. Matches full gloss enamel in surface toughness, steam and scrub resistance.

Typical uses: Bedrooms, ceilings, composite board, fibrous plaster, hallways, lounges, paperfaced plasterboard, walls.

Topcoats – urethane, solventborne

 

Resene Decorator Polyurethane Semi-Gloss
interior - solventborne – trade only

Resene Decorator Polyurethane Semi-Gloss is a hardwearing, single pack semi-gloss clear finish for timber. Excellent intercoat adhesion both initially and long term.

Typical uses: Architraves, skirtings, desks, doors, fibre and particle board, furniture, panelling, plywood, timber, veneers.


Made to order:

Resene designs and manufactures a range of products tailormade to the specific requirements of clients. From custom made colours, custom made batches to complete new formulation development and testing, the Resene R&D team can create paint, stain, clear and coating solutions to meet your requirements.

Design Pine:

Resene was approached by Independent Timber Importers (ITI), a leading Australia timber importer, to provide a high quality timber primer for factory application to finger jointed treated pine timber sold under Design Pine branding. The paint industry has long had the ability to produce excellent field applied primers for use over timber, however the history of factory applied primers is plagued with substandard quality and results. Keen to break away from the mediocrity, ITI contracted Resene to develop a primer to add value and quality to the finished product.

LOSP treatment of timber is a highly efficient and successful means of treating and protecting cut timber. However, the removal of excess solvents from the process can leave residues of resin acids and waxes on the surface, which may transfer through normal, high quality, solventborne primers causing overcoating problems with waterborne topcoats.

Resene have developed a novel method to resolve this problem, incorporated into a high quality primer, marketed under Resene True-Prime and Design Pine Primer brand names. Three years in the development, True-Prime primer has been extensively tested for compatibility with all major Australasian topcoats.

It is also now available in the New Zealand market through selected leading timber mills and hardware timber merchants in the distinct pale blue colour, meaning that both sides of the Tasman can also benefit from Resene cut timber primer protection technology.

In one year alone, over 1.3 million square metres of surface area were coated in the Resene primer, equating to over 18,000 cubic metres of wood and a staggering 5 million lineal metres. Whichever way you chop the numbers, it's a lot of wood and primer.

Wood-X:

Wood-X wood oil, designed by Resene for HermanPacific, penetrates deeply into previously uncoated exterior timber products such as Western Red Cedar weatherboards, fascia, boards, beams and mouldings. HermanPacific applies Wood-X direct to Cedar for new residential projects. As with any other wood stain or oil finish, Wood-X needs regular recoating to keep the finish looking good. To make it easy for homeowners to purchase Wood-X for their ongoing maintenance requirements it can be ordered through Resene ColorShops (NZ only). View the Wood-X colour range online.

Resene PaintTrackAuthenticity assured:

In a world first, Resene have pioneered a way that you can ensure the coating applied is authentic, with Resene PaintTrack. Resene PaintTrack is a 'chemical barcode' made up of durable and inert inorganic materials that are fully integrated into the paint. To the naked eye, paints containing Resene PaintTrack look and perform the same as normal. When illuminated using light of a specific wavelength, a unique emission spectrum is detected by a hand-held digital reader if it contains Resene PaintTrack… more

 

Some products or services may not be offered in your area or country. Please check with your local Resene ColorShop for availability. Most products can be ordered on request though lead times and minimum order quantities may apply.

More on VOCs

In response to growing concerns over VOC emissions, the Eco Choice programme focuses on the need to reduce these emissions. Solventborne paints release significantly more VOCs per litre than waterborne paints, spurring Resene chemists to develop waterborne replacements for solventborne products. Today, less than 8% of the decorative paint sold by Resene is solventborne, while the average per litre VOC levels of Resene decorative paint sales have dropped by over 90% in the last two decades, clearly demonstrating Resene's commitment to proactively develop and launch environmentally preferable waterborne technologies to the market. Resene offers an extensive range of low VOC and no added VOC paints, coatings, stains/primers and sealers, including no added VOC tinters.

Environmentally responsible packaging

Resene metal packaging includes recycled material and is printed using U.V. inks and varnishes ensuring energy savings and no emissions. A selection of Resene product label artwork is available from this section and is provided as a handy reference. The label on a pack you purchase may differ depending on the age of the stock you are purchasing and when the pack changes over to the newer label artwork. Resene paper labels are printed on environmentally responsible paper, which complies with the requirements of environmental management systems EMAS and ISO14001, using vegetable inks. Resene prints brochures, flyers etc on sustainable paper stocks wherever possible. When you download some pdf files from this website they will refer to being printed on sustainable paper stock. This is because they are an electronic copy of what we distribute to our customers.

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧