Resene slip resistant products

Resene Aquapoxy for Flooring
waterborne epoxy - interior
Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide floor coating. The cured film is glossy and non-yellowing with high surface hardness. It has excellent adhesion and water resistance, and is tolerant of application over damp surfaces. The chemical resistance is similar to conventional solventborne epoxies. Resene Aquapoxy can be modified with Resene SRG Grit to provide a slip resistant surface. This is achieved with some sacrifice to cleanability. An excellent compromise consists of one coat of Resene SRG Grit modified Resene Aquapoxy followed by one coat of unmodified Resene Aquapoxy.

Typical uses: Bitumen floors to upgrade solvent resistance, dairy units and piggeries, food processing plants, garage floors, meat works, surfaces that require regular high pressure cleaning, upgrade over sound existing paint for improved protection.

Resene Non-Skid Deck & Path
waterborne non-skid paint - exterior/interior - waterborne
Environmental Choice approved
Resene Non-Skid Deck & Path is a waterborne coating filled with graded silicas tinted to a range of standard colours. Designed for use on both concrete and bitumen to give a durable, tough, non-skid finish on all areas where foot traffic is likely. Some colours also available in Resene CoolColour™ technology.

Typical uses: Bitumen, concrete, decks, paths, steps, timber, foot trafficable areas.

Resene Uracryl 403
urethane-acrylic gloss finish - exterior/interior
Resene Uracryl 403 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils, alkalis and acids. The most unusual feature of Resene Uracryl 403 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for gloss and colour retention. Resene Uracryl 403 can be modified with Resene Industrial SRG Grit to increase slip resistance. This is achieved with some sacrifice to cleanability. An excellent compromise consists of one coat of Resene Industrial SRG Grit modified Resene Uracryl 403 followed by one coat of unmodified Resene Urqacryl 403.

Typical uses: As a long-life high-gloss topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Marine, aluminium, anti-graffiti, bridges, canopies, chemical plants, concrete wall surfaces, dairy factories, fibre cement, food processing plants, furniture, G.R.C. panels, meat works, previously painted surfaces, pulp and paper mills, refineries, roofing, steel doors, balustrades, structural steel, tank farms.

Resene Walk-on
satin flooring and paving paint - exterior/interior - waterborne
Environmental Choice approved
Resene Walk-on is a satin general purpose flooring and paving paint, based on tough acrylic resins to give maximum durability and abrasion resistance in a single pack finish. It’s ideal for use on steps, decking, concrete, porches, suitably primed timber, composite boards and interior floors.

Typical uses: Composite board, concrete, decks, fibre cement, particle board, steps, timber, foot trafficable areas.