From the Resene products section
Can't find what your looking for? Search the full product range...
Please wait until this search results page is fully loaded before making your selection.
Resene Colorwood Resene Colorwood is an exciting way of treating natural timbers and enhancing the grain. Gives coloured timbers with the see-through look as it allows the natural grain of all timbers to show through. All colours can be intermixed, allowing you to create your own colours – always keep a note of any intermix recipes so you can recreate them if you need more. The finished colour is influenced by the timber colour itself, the denseness of the timber and the length of time the stain is left before the excess is wiped off. Always test Resene Colorwood on a small off-cut of timber to ensure the desired colour is being achieved. Strong colours may be difficult to achieve on hardwood and heart timbers due to lack of penetration. If the selected colour is too strong, reduce with Resene Colorwood Reducing Base. Resene Colorwood is very easy to apply by brush or rag. For best results, wipe excess Resene Colorwood off with a dry, absorbent, lint free cloth, rubbing along the grain. This also ensures maximum adhesion of topcoats. Overcoating is recommended to ensure the timber is protected and to maximise the longevity of the finish. Resene Colorwood is easily overcoated with Resene Aquaclear, Resene Qristal ClearFloor 1K, Resene Qristal Polyurethanes or Resene Polythane. Typical uses: Canework, cork, doors, dressed and rough sawn timber, fibre and particle board, furniture, kitset and nursery furniture, panelling, rope, timber (imported and native), timber ceilings and beams, window and door frames. Ingredients: Water, Minerals (Clay, Feldspar), Resin (APEO free and Formaldehyde free), Mineral Oil, Alcohol, Soap, Preservatives < 0.1%, Non-toxic Trace Ingredients < 0.1%. |
Resene Colorwood Greywash Resene Colorwood Greywash is designed to give a greywash effect on new timber or old varnished interior timbers. It’s based on Resene Colorwood Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene Colorwood stain first, then overcoating with Resene Colorwood Greywash. Resene Colorwood is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Woodsman colours for a consistent colour palette inside and outside your project. For a greywashed finish outside use Resene Woodsman Greywash. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. |
Resene Colorwood Whitewash Resene Colorwood Whitewash is an exciting way of achieving a whitewash effect on new timber or old varnished interior timbers. Resene Colorwood is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Woodsman colours for a consistent colour palette inside and outside your project. For a whitewashed finish outside use Resene Woodsman Whitewash. May also be tinted to the Resene 'We Speak Beach' range of wash colours. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. Ingredients: Water, Minerals (Amorphous Silica), Resin (APEO free and Formaldehyde free), Silicone Oil, Alcohol, Soap, Preservatives < 0.1%, Non-toxic Trace Ingredients < 0.1%. |
Resene Woodsman Greywash Resene Woodsman Greywash is an exciting way of achieving a greywash effect on new or weathered exterior timber. It’s based on Resene Woodsman Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene wood stain first, then overcoating with Resene Woodsman Greywash. Resene Woodsman is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Colorwood colours for a consistent colour palette inside and outside your project. For a greywashed finish inside use Resene Colorwood Greywash. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. |
Resene Woodsman Whitewash Resene Woodsman Whitewash is an exciting way of achieving a whitewash effect on new or weathered exterior timber. Resene Woodsman is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Colorwood colours for a consistent colour palette inside and outside your project. For a whitewashed finish inside use Resene Colorwood Whitewash. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. |