From the Resene products section
Can't find what your looking for? Search the full product range...
Please wait until this search results page is fully loaded before making your selection.
Resene Acrylic Undercoat Resene Acrylic Undercoat is an easy brushing, quick, hard drying undercoat with exceptional flow and sanding characteristics. While specifically designed for maximum benefit under waterborne enamels, such as Resene Enamacryl and Resene Lustacryl, Resene Acrylic Undercoat tinted to the correct colour is ideal for use under a wide range of waterborne and solventborne topcoats to improve the hiding of the paint system. Resene Acrylic Undercoat gives all the hiding benefits associated with Resene Enamel Undercoat combined with the advantages of being waterborne, such as easy clean up in water, lower odour and therefore the desirability of using it with both acrylic and enamel topcoats. Suitable for interior and exterior use, it can be used in most paint systems as a substitute for Resene Enamel Undercoat. For a consistent undercoat solution from solventborne to waterborne, Resene Enamel Undercoat and Resene Acrylic Undercoat, use a varishade colour system to provide the right basecoat for any shade. This helps provide the chosen topcoat with enhanced obliteration. Available in white and varishade tone there are six options including white and five varishades which grow steadily darker or higher in value moving from 1 to 5. White is tinted to the three palest shades while the varishade tone is tinted to reach the two deepest shades. For optimum effect, CoolColour topcoats should use a white Resene Acrylic Undercoat or white primer only. Choosing which varishade to use is recommended through the Resene e-tint colour formulation system. Bright accent colours such as bright reds, yellows and oranges tend to use a slightly lighter varishade than you may expect. Typical uses: All exterior and interior prepared surfaces, block and brickwork, cement plasters, cloth and woven wallcoverings, fibre and particle board, furniture, paperfaced plasterboard (GIB®, Gyprock®), repaint old work, timber (including Matai, Spotted Gum and Totara), wallboards, wallpaper. |
Resene Enamel Undercoat Resene Enamel Undercoat is a blend of special alkyd resins balanced with unique pigments. An easy brushing, quick, hard drying undercoat with exceptional flow and sanding properties. For a consistent undercoat solution from solventborne to waterborne, Resene Enamel Undercoat and Resene Acrylic Undercoat, use a varishade colour system to provide the right basecoat for any shade. This helps provide the chosen topcoat with enhanced obliteration. Available in white and varishade tone there are six options including white and five varishades which grow steadily darker or higher in value moving from 1 to 5. White is tinted to the three palest shades while the varishade tone is tinted to reach the two deepest shades. For optimum effect, CoolColour topcoats should use a white Resene Acrylic Undercoat or white primer only. Choosing which varishade to use is recommended through the Resene e-tint colour formulation system. Bright accent colours such as bright reds, yellows and oranges tend to use a slightly lighter varishade than you may expect. Typical uses: All exterior and interior prepared surfaces, architraves, bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard (GIB®, Gyprock®), skirtings, suitably primed metals, timber doors, wallboards, weatherboards. |
Resene Quick Dry Resene Quick Dry Waterborne Primer Undercoat provides long-term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. The latest formulation has enhanced flow and sanding characteristics for maximum benefit under waterborne enamels, such as Resene Enamacryl and Resene Lustacryl. Typical uses: Architraves, block and brickwork, cement plaster, cloth and woven wallcoverings, particle board, repaint old work, timber (including Matai, Spotted Gum and Totara), wallboards, wallpaper. Ingredients: Water, Minerals (Calamine, Clay, Mica, Talc and Titania), Resin (Formaldehyde free), Mineral Oil, Wax, Alcohol, Soap, Preservatives < 0.1%, Non-toxic Trace Ingredients < 0.1%. |
Resene Master Painters Stainers (also known as Resene MPS Stainers) Resene Master Painters Stainers are multi-purpose no added VOC colourants that have been tested for use in all Resene decorative undercoats and topcoats. This enables colours to be tinted without adding unwanted VOCs. Primarily used by professional painters to add a touch of colour to white products. |
-->
Resene Decorator is a range of trade products, from high gloss to ultra low sheen, including a range of primers and sealers designed for professional trade use. For more information contact your Resene ColorShop or representative. Prep/sealers/primers/undercoats: Waterborne | Solventborne Topcoats: Pigmented | Soventborne | Urethane, Solventborne |
Resene Decorator Acrylic Sealer Undercoat Resene Decorator Acrylic Sealer Undercoat is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent holdout of topcoats. Very good opacity. Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard. |
Resene Decorator Alkyd Undercoat Resene Decorator Alkyd Undercoat All Purpose is a blend of special alkyd resins balanced with unique pigments, making it an easy brushing hard drying undercoat with exceptional sanding properties. Designed with a low sheen that allows exceptional enamel holdout. Suitable for overcoating by most Resene finishing systems. Typical uses: Bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard, suitably primed metals, timber – architraves, doors, skirtings, window frames, wallboards, weatherboards, all exterior and interior prepared surfaces. |
Resene Decorator Alkyd Undercoat 100 Resene Decorator Alkyd Undercoat 100 All Purpose is a blend of special solventborne resins balanced with unique pigments, making it an easy brushing hard drying undercoat with exceptional sanding properties. Suitable for overcoating by most Resene finishing systems. Typical uses: Bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard, suitably primed metals, timber – architraves, doors, skirtings, window frames, wallboards, weatherboards, all exterior and interior prepared surfaces. |
Resene Decorator Alkyd Wood Primer Resene Decorator Alkyd Wood Primer is based on an oil modified alkyd resin blended with pigments to give ease of application and good adhesion to substrates. Flexible and produces an ideal surface for subsequent paint finishes. Excellent adhesion to timber and old paint (ideal for spot priming on repaint work). Built in resistance to mould and nail head corrosion. Unsuitable for priming Matai, Spotted Gum and Totara – use only Resene Decorator Acrylic Primer Undercoat. Typical uses: Doors, outdoor furniture, timber, weatherboards, window frames. |
Resene Decorator Fast Dry Alkyd Primer Undercoat Resene Decorator Fast Dry Alkyd Undercoat is designed to be a fast drying solventborne undercoat to ready a surface for topcoating. Suitable for overcoating by most Resene finishing systems. Typical uses: Interior surfaces that have been appropriately prepped/primed/sealed. |
Resene Decorator Interior Pigmented Sealer/Undercoat Resene Decorator Interior Pigmented Sealer/Undercoat is a pigmented, solventborne, alkali-resistant, penetrating sealer with the ability to penetrate and bond old decayed or stained surfaces and make them ready for painting. Typical uses: Chalky and powdery surface, fibre cement, paperfaced plasterboard, plaster – gypsum and solid. |