Choose your favourite Resene colour for powder coated surfaces for an integrated colour palette from paint to powder.
The Resene Powder Coating range includes favourite premade Resene colours and a bespoke service where your Resene colour will be made for you to Resene colour standards (minimum quantity of 20kg applies to made to order).
This exciting collaboration between Resene and AkzoNobel brings you authentic Resene colours made into quality Interpon powder coating, perfect for finishing powder coated surfaces inside and out.
Resene Powder Coatings are ideal for all residential applications and a broad range of interior and exterior applications where excellent overall performance is required.
Use Resene Powder Coating on:
Here are some commonly requested Resene colours for powder coating projects to get you started. You can choose from Resene solid colours from Resene colour charts so get inspired and choose your favourite Resene colours. If you have regular ongoing demand for a specific Resene colour that is not shown below, this can be made and stocked for you.
Resene Dusky Sound
N86-007-107
(COLORSTEEL® Snowstone Matte)
Resene Titania
G84-012-095
(COLORSTEEL® Titania)
Resene Atmosphere
N76-004-127
(COLORSTEEL® Gull Grey)
Resene Gauntlet
N57-006-087
(COLORSTEEL® Sandstone Grey)
Resene Expedition
N42-002-237
(COLORSTEEL® Tidal Drift Matte)
(COLORSTEEL® Thunder Grey, COLORBOND® Woodland Grey)
Resene Ironsand
N36-003-056
(COLORSTEEL® Ironsand)
Resene Grey Friars
N35-004-253
(COLORSTEEL® Grey Friars)
Resene Element
N30-002-253
(COLORSTEEL® Flaxpod)
Resene Karaka
G31-010-106
(COLORSTEEL® Karaka)
Resene All Black
N25-001-264
(COLORSTEEL® Ebony)
Resene Pioneer Red
R39-075-033
Resene Permanent Green
G37-031-154
Resene Resolution Blue
B40-097-275
Colours used outside look lighter than you expect due to bright lighting – if in doubt choose a darker colour. Allow extra contrast between colours to compensate for bright natural light.
Colours used inside look darker and more intense than you expect – if in doubt choose a lighter colour.
It is often best to choose strength or tonal variations on two adjacent surfaces finished in different products as sheen levels, texture and finishing can affect how the colour looks.
If you decide to choose a lower or higher sheen finish for your powder coating, lower sheen finishes will tend to make the colour look earthier and moodier. A higher sheen finish will tend to make the colour look brighter and cleaner.
Powder coating samples will be available for the colour palette shown. If you wish to get another Resene colour not shown, you can request to see a sample of the colour during the production process to ensure you are happy with your Resene colour request.
The Resene Powder Coating range is suitable for all residential use using Interpon D1010.
Interpon D1010 is suitable for Clause A1 of the New Zealand Building Regulations, domestic residential buildings of classified uses, class 2.0 housing and Class 7.0 outbuildings. Up to 3 levels in height. All NZ3604 Zones B, C & D.
It's easy to specify your Resene Powder Coating, simply specify:
Resene Powder Coating
Your chosen Resene colour and Resene colour code
For example, Resene Powder Coating Sea Fog N92-005-100 – this is the standard Resene Powder Coating in the Matt finish (~30% gloss) in Resene Sea Fog.
If you wished to have a sheen level change you can request lower or higher sheen finishes. To specify these, you would:
If no gloss level is stated the standard 30 degree gloss finish will be provided.
If you are planning to regularly use a Resene Powder Coating colour, AkzoNobel can make and hold this in stock for you for faster access. Talk to your Interpon representative to arrange this service.
Interpon checks the quality of your colour for each batch of colour, and for large batches the colour will be tested multiple times to ensure it means the appropriate colour standard. Sorry colours lighter than Resene Alabaster cannot be reproduced accurately in powder coating.
AkzoNobel will supply Resene Powder Coating made to Resene colour standards for your project direct to your powder coating applicator.
The Interpon D Approved Applicators Network is designed to ensure the Interpon powder coating you choose is applied correctly, meeting Interpon powder coatings warranty requirements to local and international standards.
Find your local approved applicator:
Resene Powder Coatings are made with a warranty-grade powder coating engineered specifically for architectural aluminium applications. Enjoy an up to 15 year film integrity warranty and a 15 year colour retention warranty*.
*The warranty only applies when your powder coating is applied by an Interpon Approved Applicator, who will provide the completed warranty document to you.
Annual cleaning is recommended to help keep your powder coating fresh and maximise its life. If you are in a coastal, geothermal or similar zone, washing every three months, when you wash your windows, is recommended.
Interpon D Approved Applicators can offer a warranty on the architectural product range for architectural aluminium applications.
Becoming an Interpon Accredited Applicator involves meeting quality standards for metal pre-treatment facilities, powder application equipment and stoving facilities. Additionally Interpon must also be satisfied sufficient quality management procedures are in place.
For more information or to become an approved applicator please visit the Interpon Approved Applicator page:
Web: www.specifyinterpon.co.nz
Customer services team: 0800 150 527
Email: salesnz@interpon.com
Specification consultant:
Web: www.specifyinterpon.com.au
Customer services team: 01800 630 516
Email: salesoz@interpon.com
Specification consultants:
For any other enquires, contact Resene at powdercoatings@resene.co.nz.