Resene Paints - home page

Shiny and new

Project ideas and inspiration from Good magazine

Combine paint and a vinyl adhesive to great effect.

Table tops are a fantastic place to get a bit creative. Adhesive vinyls are available from a variety of hardware and homeware stores, and here I have transformed a boring old low coffee table using a copper-look vinyl together with great new paint shades from the latest Resene Fashion colours range.

Refinished coffee table

Drab to fab
The paint I used is a matt waterborne enamel, Resene SpaceCote Flat. Combining this with a shiny adhesive vinyl creates an interesting reflective effect on the tabletop

You will need

Vinyl tips:

Prime table, tape out sections
Paint individual sections
Applying and sizing the vinyl
Applying vinyl over the tape bands

Step by step

Step 1: Give all paintable surfaces a light sand to help the paint to bond. Next, wipe all surfaces with a damp cloth.

Step 2: Paint all surfaces of the coffee table with Resene Quick Dry waterborne primer undercoat. Allow to fully dry. If your table is very smooth, use Resene Waterborne Smooth Surface Sealer instead of Resene Quick Dry.

Table prior to refinishing
Before refinishing

Step 3: Use masking tape to mark the shapes you want on the tabletop.

Step 4: Topcoat one area on the tabletop plus all lower surfaces using Resene waterborne enamel. I used Resene White Island.

Step 5: Paint a second area on the tabletop using the testpot. I used Resene Triple Duck Egg Blue - a lovely blue grey that is a perfect foil for shiny copper. Allow to dry and apply a second coat as necessary. Remove the masking tape when both coats are dry fully dry. Allow approximately 24 hours depending on the weather conditions.

Step 6: Place the vinyl adhesive upside down over the area of the coffee table you wish to cover, using objects to hold it in place. Mark the edge with a pen and lay the vinyl on a flat surface before carefully cutting along the edge.

Step 7: Peel off one end of the vinyl and fix it in place before removing the rest of the backing and sticking it down, smoothing out any wrinkles as you go.

Step 8: Cut extra vinyl strips to cover any gaps left by the masking tape (top right), and if you want, add an extra strip around the edge of the tabletop

Resene White Island

Resene Triple Duck Egg Blue

Styling, words and photography by Sarah Heeringa. 2019.

Download this article as a PDF

Good magazine projects
Wanting to tackle a project at your place but only have a weekend to spare? Get inspired with these projects from Good magazine. Reclaim and upcycle with paint.

View projects


Get inspired ! Subscribe      Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   –

View Videos

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.