Resene Flexicover E
Resene Flexicover E - elastomeric coating
It is used on very similar substrates to Resene Thixalon 5 (see Data Sheet D63), however Resene Flexicover E is the only product that performs well over badly cracked and deteriorating substrates and is therefore recommended over propagating cracks - that is, when cracks are getting worse and/or new ones are appearing. This product will resolve many less than perfect substrates; however there can be no real guarantees to its success on really poor substrates. It is able to be applied at very high thicknesses without sagging or film cracking and is best applied by brush, roller, goop loop (for a textured effect) or spray.
Resene Flexicover E has a semi-gloss finish but like all elastomeric coatings is more prone to dirt pickup than standard coatings. This may be easily overcome with a final coat of a standard waterborne topcoat such as Resene Lumbersider (see Data Sheet D34) or Resene X-200 waterproofing membrane (see Data Sheet D62).
Resene Flexicover E is available in Resene
Total Colour System white, off whites and pastels.
Product Data Sheet: D64
Resene projects are available for viewing in the Products in Action gallery.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.
|Australia: PO Box 924, Beenleigh, Queensland 4207
Phone: 1800 738 383. Fax: 1800 064 960
Email: firstname.lastname@example.org. Web: www.resene.com.au
|New Zealand: PO Box 38242, Wellington Mail Centre, Lower Hutt 5045
Phone: +64 (4) 577 0500, 0800 RESENE (737 363), Fax: (04) 577 0600
Email: email@example.com. Web: www.resene.co.nz