Resene offer a range of protective, industrial and marine coatings,
capable of dealing with on and offshore corrosion and protecting many
substrates in aggressive environments.
| Special purpose products |
 |
Resene Alumastic
high build epoxy
Resene Alumastic is formulated with a unique blend of low-molecular
weight resins, penetrants and surface active agents. This allows
excellent wetting and penetration of rusted steel surfaces.
Reaction occurs on the surface, setting the components into
a high molecular weight, tough durable polymer. Self-priming
maintenance coat over steel, rusted steel and galvanised steel. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
View project
Label - base
Label - hardener |
 |
Resene
Aquapoxy
waterborne epoxy - interior
Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide.
The cured film is glossy and non-yellowing with high surface hardness
and excellent flexibility. It exhibits excellent adhesion and
water resistance, and is tolerant of application over damp surfaces.
Its excellent solvent resistance makes it very resistant to graffiti.
The chemical resistance is similar to conventional solventborne
epoxies. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardener Application sheet Label - base Label - hardener |
 |
Resene
Aquapoxy for Flooring
waterborne epoxy - interior
Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide
floor coating. The cured film is glossy and non-yellowing with
high surface hardness. It has excellent adhesion and water resistance,
and is tolerant of application over damp surfaces. The chemical
resistance is similar to conventional solventborne epoxies. Resene
Aquapoxy is available modified with Resene SRG Grit to provide
a non-skid surface. This is achieved with some sacrifice to cleanability.
An excellent compromise consists of one coat of Resene SRG Grit
modified Resene Aquapoxy followed by one coat of unmodified Resene
Aquapoxy. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardener |
 |
Resene
ArmourBond
epoxy sealer
Resene ArmourBond is a low viscosity, penetrative epoxy sealer
and porosity equaliser for porous substrates. Reinforces rusted
steel surfaces to give a sound base for application of protective
coating systems. Se |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
Label - base
Label - hardener |
 |
Resene
ArmourCat 800
clear sealer - interior
Resene ArmourCat 800 is a two pack, acid-catalysed clear sealer
for priming composite boards and timber prior to application of
Resene ArmourCat clear finishes. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene
ArmourCat 805
pigmented sealer/undercoat - interior
Resene ArmourCat 805 is a two pack, tintable acid-catalysed sealer/undercoat
for priming composite boards and timbers prior to application
of Resene ArmourCat metallic and solid colours. Exhibits quick
drying; excellent filling and sanding characteristics |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene
ArmourCat 810
metallic effects - interior
Resene ArmourCat 810 is a two pack, acid-catalysed finish formulated
to produce metallic and special effects. May be overcoated with
either Resene ArmourCat or Duragloss clear finishes for enhanced
wear and appearance. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene
ArmourCat 822
satin solid colour - interior
Resene ArmourCat 822 is a two pack, acid-catalysed pigmented satin
finish for composite boards and timber. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene
ArmourCat 823
gloss solid colour - interior
Resene ArmourCat 823 is a two pack, acid-catalysed pigmented gloss
finish for composite boards and timber. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene ArmourCat 842
satin clear - interior
Resene ArmourCat 842 is a two pack, acid-catalysed satin
clear finish for composite boards and timber. Suitable for use
as a clear over Resene
ArmourCat 810 Metallic Effects for improved durability and
cleaning. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene
ArmourCat 843
gloss clear - interior
Resene ArmourCat 843 is a two pack, acid-catalysed gloss clear
finish for composite boards and timber. Suitable for use as a
clear over Resene
ArmourCat 810 Metallic Effects for improved durability and
cleaning. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
A4 brochure
Label - base
Label - hardener |
 |
Resene
Armourchlor HB-F
chlorinated rubber high build finish - exterior/interior
Resene Armourchlor HB-F is a single pack high build chlorinated
rubber finish coat providing outstanding resistance to corrosion
in severe atmospheres, where it may be difficult or uneconomic
to employ a two pack coating. These characteristics ensure maintenance
free performance during many years' exposure in highly corrosive
environments. |
Data Sheet Safety Data SheetDisclaimer Label |
 |
Resene
Armourchlor HB-P
chlorinated rubber high build primer - exterior/interior
Resene Armourchlor HB-P is a tough durable corrosion inhibiting
primer based on zinc phosphate and chlorinated rubber. The coating
has a very high degree of impermeability and although blast cleaning
must always remain the preferred method of surface preparation
it will give superior performance over power or hand cleaned steel. |
Data Sheet Safety Data SheetLabel |
 |
Resene
Armourchlor AM-ZP
chlorinated rubber primer/finish Coat - interior
Resene Armourchlor AM-ZP is a tough, self-priming corrosion inhibiting
finish coat based on zinc phosphates and chlorinated rubber for
use on suitably prepared interior metal surfaces. |
Data Sheet Safety Data SheetLabel |
 |
Resene
Armourcote 210
modified alkyd high build primer
Resene Armourcote 210 is a single-pack, high-build inhibitive
primer for general industrial and non-immersion marine use. Suitable
for overcoating with a wide range of protective and decorative
topcoat systems. |
Data Sheet Safety Data SheetLabel |
 |
Resene
Armourcote 220
epoxy primer
Resene Armourcote 220 is a polyamide cured inhibitive epoxy primer
for general industrial and marine use. May be recoated with a
wide range of topcoats to give durable paint systems for immersion
and non-immersion services. Excellent aged recoatability with
epoxies. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardenerLabel |
 |
Resene
Armourcote 221
brushing epoxy primer
Resene Armourcote 221 combines the performance properties of a
quality inhibitive epoxy primer with the convenience of brush
or roller application. Suitable for priming both ferrous and non-ferrous
metals that are to be finished with brushing two component polyurethanes,
such as Resene Uracryl 400 Series topcoats. primer for new or
maintenance work |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardenerLabel - base
Label - hardener |
 |
Resene
Armourcote 510
high solids epoxy
Resene Armourcote 510 is a high performance, self-priming epoxy
mastic combining superb adhesion with true barrier properties.
Will tolerate compromised surfaces such as handcleaned steel. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - base Label - hardener |
 |
Resene
Armourcote 512
epoxy enamel
Resene Armourcote 512 is a high build, gloss epoxy finish that
protects concrete and metals against corrosion and chemical degradation.
Fully cured film is hard and abrasion resistant. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - base Label - hardener |
 |
Resene
Armourcote 515 HS
fast dry epoxy
Resene Armourcote 515 HS is a high performance epoxy intermediate/base
coat which forms an excellent corrosion barrier. Fast dry characteristics
are especially beneficial where early handling of coated items
or same day application of multi-coat systems is required. Excellent
low temperature cure properties allow use of the product over
winter when application of conventional epoxy cure based systems
is not possible. Suitable for use in most industrial and marine
environments. Formulated for spray application. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - base Label - hardener |
 |
Resene
Armourcote 608
fast dry spraying enamel - exterior/interior
Resene Armourcote 608 is a high gloss, fast dry spraying enamel
based on a modified polyester resin. Durability, colour and gloss
retention is typical of high quality gloss enamels. |
Data Sheet Safety Data SheetLabel |
 |
Resene
ArmourZinc 110
zinc rich primer single pack
Resene ArmourZinc 110 is a high zinc content primer exhibiting
the excellent corrosion resistance of zinc rich primers. Prevents
underfilm corrosion at areas of damage. |
Data Sheet Safety Data SheetLabel |
 |
Resene
ArmourZinc 120
zinc epoxy primer
Resene ArmourZinc 120 is a tough, abrasion resistant film that
bonds strongly to steel, inorganic zinc and existing epoxy surfaces.
zinc content of the coating gives steel cathodic protection if
the film is damaged. Rapid drying permits early handling of steel
when Resene Armourcote 220 is used as a shop
primer for new construction projects. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - base Label - hardener |
 |
Resene
Armourzinc 125
inorganic hybrid primer
Resene ArmourZinc 125 is a two-pack, inorganic hybrid, zinc rich
primer. Base primer for high performance protective coating systems
for steel structures in demanding environments. Fast dry-to-recoat
increases through-put of multi-coat systems. Unique rheology allows
defect-free films to be readily produced. Cures to a dense film
with minimal pinholing when overcoated. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - base Label - hardener |
 |
Resene
Graffiti Cleaner
exterior/interior
Resene Graffiti Cleaner is formulated for effective and easy removal
of graffiti from Resene Engineered Coating Systems anti-graffiti
coatings. Very effective against common materials used for graffiti,
such as spray paint, permanent markers, inks, crayons and lipsticks. |
Data Sheet Safety Data SheetLabel |
 |
Resene
Imperite 413
polyester-urethane gloss - exterior/interior
Resene Imperite 413 is a highly decorative and durable two pack
gloss urethane topcoat for the decoration and protection of interior
and exterior surfaces. Ideal for use where bright colours and
outstanding colour and gloss retention are to be an architectural
feature. Excellent resistance to a wide range of chemicals, solvents
and salt solutions. Extremely durable topcoat, resists marring
and scuffing. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - base Label - hardener |
 |
Resene Imperite I.F. 502
acrylic-epoxy semi-gloss clear - exterior/interior
Resene Imperite I.F. 502 improves the cleanability, abrasion resistance
and colour retention of Resene Imperite I.F. 503 Metallic
Effects finishes. |
Data Sheet Safety Data Sheet Label - base Label - hardener |
 |
Resene
Imperite I.F. 503
acrylic-epoxy gloss - exterior/interior
Resene Imperite I.F. 503 is a high performance finish for use
when an isocyanate-free topcoat is required. Two-component finish
for a wide variety of suitably prepared substrates in all but
the most demanding environments. Quick dry properties allow early
handling of coated items. Available in solid and metallic pigmented
colours. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - baseLabel - hardener |
 |
Resene
Mica Bond
micaceous pigmented alkyd finish - exterior/interior
Resene Mica Bond is an oleoresinous based micaceous iron oxide
pigmented coating modified with aluminium to provide lighter colours.
Resene Mica Bond is highly resistant to weathering, and mildly
corrosive conditions. Its pigmentation confers a very high degree
of moisture vapour resistance due to its laminar type structure. |
Data Sheet Safety Data SheetColour optionsLabel |
 |
Resene
Polymeric AV-8
high build vinyl - exterior/interior
Resene Polymeric AV-8 is a single pack high-build vinyl topcoat
providing outstanding resistance to corrosion in severe atmospheres.
Contains an acrylic reinforcement to provide superior gloss and
colour retention. These characteristics ensure maintenance-free
performance over many years exposure in highly corrosive environments. |
Data Sheet Safety Data SheetLabel |
 |
Resene
Rust-Arrest
alkyd anti-corrosive primer
Resene Rust-Arrest is a lead and chromate free primer developed
for use on steel where optimum surface preparation is not practical.
Resene Rust-Arrest has good surface wetting properties and protects
via passivating pigments. |
Data Sheet Safety Data SheetLabel |
 |
Resene
Squash Court Coating
interior
Resene Squash Court Coating is a two pack waterborne epoxy especially
developed for coating squash court walls.
Try out colour options on our squash court colouring programme online with just a few clicks. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerSee colour chartLabel |
 |
Resene
Steel Fab
chromate free fast dry shop primer
Resene Steel Fab primer is a fast drying, general purpose anti-corrosive
primer for use on structural steel. |
Data Sheet Safety Data Sheet -
Grey, White,
Grant Grey Safety Data Sheet -
Red Oxide,
PMS287 BlueSee colour chartLabel |
 |
Resene
Uracryl 401
urethane-acrylic undercoat/buildcoat - exterior/interior
Resene Uracryl 401 is a unique high performance two component
urethane undercoat for use as an undercoat/buildcoat on a wide
variety of suitably prepared and primed substrates to be finished
with pigmented Resene Uracryl 400 Series topcoats. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - baseLabel - hardener |
 |
Resene
Uracryl 402
urethane-acrylic semi-gloss finish - exterior/interior
Resene Uracryl 402 is a unique high performance two component
finish coat with excellent resistance to abrasion, moisture, petroleum
solvents and mineral and vegetable oil. The most unusual feature
of Resene Uracryl 402 is that, unlike most other classes of high
performance coatings, it looks as good as it protects. The sophisticated
combination of aliphatic urethanes and urethane reactive acrylic
resins gives a system unsurpassed for durability and colour retention. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - baseLabel - hardener |
 |
Resene
Uracryl 403
urethane-acrylic gloss finish - exterior/interior
Resene Uracryl 403 is a unique high performance two component
finish coat with excellent resistance to abrasion, moisture, petroleum
solvents and mineral and vegetable oils, alkalis and acids. The
most unusual feature of Resene Uracryl 403 is that, unlike most
other classes of high performance coatings, it looks as good as
it protects. The sophisticated combination of aliphatic urethanes
and urethane reactive acrylic resins gives a system unsurpassed
for gloss and colour retention. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerLabel - baseLabel - hardener |
 |
Resene
Uracryl 404
urethane-acrylic low sheen finish - exterior/interior
Resene Uracryl 404 is a unique high performance two component
finish coat with excellent resistance to abrasion, moisture, petroleum
solvents and mineral and vegetable oil. The most unusual feature
of Resene Uracryl 404 is that, unlike most other classes of high
performance coatings, it looks as good as it protects. The sophisticated
combination of aliphatic urethanes and urethane reactive acrylic
resins gives a system unsurpassed for durability and colour retention. |
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
Label - base
Label - hardener |
 |
Resene Uracryl GraffitiShield
clear anti-graffiti finish - gloss and semi-gloss
Resene Uracryl GraffitiShield is a waterborne two pack clear anti-graffiti coating for a variety of substrates that develops early resistance to tagging with spray paint. Available in gloss or semi-gloss. Graffiti can be cleaned from a substrate protected with Resene Uracryl GraffitiShield using Resene Graffiti Cleaner. Considerably lower in VOCs than traditional solventborne anti-graffiti systems. |
Data Sheet Safety Data Sheet -
base Safety Data Sheet -
hardenerProduct flyer
Label - base
Label - hardener |
 |
Resene
Vinyl Etch
adhesion primer
Resene Vinyl Etch primer combines all the versatility of the normal
two pack product with the convenience of a stable single pack.
The fast drying time, adhesion, abrasion resistance, and overcoatability
features have all been maintained in this highly effective chromate
free primer/ pretreatment. |
Data Sheet Safety Data Sheet -
Black, White,
Grey Safety Data Sheet -
Red OxideLabel |
 |
Resene
Waterborne Uracryl 802
waterborne urethane acrylic semi-gloss finish - exterior/interior
Resene Waterborne Uracryl 802 is a waterborne high performance two component semi-gloss finish with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils. The most unusual feature of Resene Waterborne Uracryl 802 is that, unlike other classes of high performance coatings, it looks as good as it protects and is unsurpassed for durability and colour retention.
|
Data Sheet
Safety Data Sheet -
base
Safety Data Sheet -
hardener
Label - base
Label - hardener |
 |
Resene
Zincilate 10
inorganic zinc silicate two pack
Resene zincilate 10 is a sacrificial two pack priming system for
steel, having outstanding anti-corrosive properties. May be applied
in conditions up to 95% relative humidity. Eliminates rust undercutting.
Excellent resistance to abrasion and impact damage. |
Data Sheet Safety Data Sheet -
powder Safety Data Sheet -
liquidLabel |
 |
Resene
Zincilate 11
inorganic zinc silicate single pack
Resene zincilate 11 is a sacrificial priming system for steel
with superb anti-corrosive properties. May be applied in conditions
up to 95% humidity. Eliminates rust undercutting. Excellent resistance
to abrasion and impact damage. The performance is equivalent to
the more common two pack systems with the following significant
benefits: Eliminates mixing procedures on-site and the errors
this can cause; Eliminates waste as unused material can be stored
for subsequent use; A mechanically agitated pot is no longer necessary;
a bottom outlet pot becomes optional. |
Data Sheet Safety Data SheetLabel |
| |
Environmentally responsible
packaging
Resene metal packaging includes recycled material and is printed
using UV inks and varnishes ensuring energy savings and no emissions.
Resene paper labels are printed on environmentally responsible
paper, which complies with the requirements of environmental management
systems EMAS and ISO14001, using vegetable inks. |
|
