Feedback
Resene X-300E
Resene X-300E

Resene X-300E - elastomeric coating


Resene X-300E is a thixotropic weathertight membrane designed for thick application over cracked concrete surfaces. Thixotropic means it is a coating material that, while free-flowing and easy to manipulate under the brush, sets to a gel within a short time when it is allowed to remain at rest. It is made using acrylic elastomers that have excellent 'memory' of their original shape when distorted, which gives the product incredible movement and crack bridging capabilities, enabling it to bridge gaps up to half the thickness of the paint film.

It is used on very similar substrates to Resene X-400 (see Data Sheet D63), however Resene X-300E is the only product that performs well over badly cracked and deteriorating substrates and is therefore recommended over propagating cracks - that is, when cracks are getting worse and/or new ones are appearing. This product will resolve many less than perfect substrates; however there can be no real guarantees to its success on really poor substrates. It is able to be applied at very high thicknesses without sagging or film cracking and is best applied by brush, roller, goop loop (for a textured effect) or spray.

Resene X-300E has a semi-gloss finish but like all elastomeric coatings is more prone to dirt pickup than standard coatings. This may be easily overcome with a final coat of a standard waterborne topcoat such as Resene Lumbersider (see Data Sheet D34) or Resene X-200 weathertight membrane (see Data Sheet D62).

Resene X-300E is available in Resene Total Colour System white, off whites and pastels.

Resene X-300E replaces Resene Flexicover E.

Product Data Sheet: D64

Specify: One-Line Specification section 17e and 20e/I

Specifying tips:
Resene Limelock (see Data Sheet D809) is a preparatory coating designed to cure and seal cementitious surfaces by retaining moisture necessary to achieve cure and trapping free lime, minimising downtime between the completion of plastering and commencement of painting.

Environmental:
Resene X-300E is Environmental Choice approved.

Resene projects are available for viewing in the Products in Action gallery.

View relevant Architects Memos:
Architects Memo October 1999 rough call - lightweight cladding and monolithic finishes
Architects Memo April 1985 does your paint breathe?

Follow
View Videos
 

Resene Paints Ltd

Choose your Resene paint colours

Our vision is to be respected as an ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile and Environmental Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

We would love to hear from you if you wish to use Resene’s images, information and ideas for social medial, blogs, newsletters and other media use. Please email update@resene.co.nz and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

Australia:
PO Box 924, Beenleigh, Queensland 4207
P: 1800 738 383. F: 1800 064 960
advice@resene.com.au
www.resene.com.au

New Zealand:
PO Box 38242, Wellington Mail Centre, Lower Hutt 5045
P: +64 (4) 577 0500, 0800 RESENE (737 363). F: (04) 577 0600
advice@resene.co.nz
www.resene.co.nz