From the What's New archive - May 2006...
ReseneSpaceCote Low Sheen waterborne enamel (formerly known as Resene Zylone SpaceCote) has firmly cemented itself as the premium interior paint finish for everything from broadwall areas in both dry and wet areas to trim and joinery.
With the Resene waterborne enamel family consisting of Resene Enamacryl (gloss), Resene Lustacryl (semi-gloss) and Resene SpaceCote Low Sheen (low sheen), a gap in the sheen level requirements exists for a flat waterborne enamel - the new Resene SpaceCote Flat.
Resene SpaceCote Flat is a flat version of Resene SpaceCote Low Sheen and is intended primarily for ceilings in wet areas and where a client has an open plan living and lounge that extends into an 'exterior' sheltered/roofed living area where they want to carry the same finish through both areas. It may also be used wherever Resene Zylone 20 has traditionally been used.
New Resene SpaceCote Flat is available in 1L and 4L white and colours off white, providing an extensive selection of Resene Total Colour System colours to choose from.
Resene SpaceCote Low Sheen remains the best product to specify for most areas inside, with Resene SpaceCote Flat providing a complementary waterborne enamel finish on ceilings.
For further technical information see Data Sheet D314.
Can't find what you're looking for? Ask us!
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.
PO Box 924, Beenleigh, Queensland 4207
Phone: 1800 738 383. Fax: 1800 064 960
Email: email@example.com. Web: www.resene.com.au
PO Box 38242, Wellington Mail Centre, Lower Hutt 5045
Phone: +64 (4) 577 0500, 0800 RESENE (737 363), Fax: (04) 577 0600
Email: firstname.lastname@example.org. Web: www.resene.co.nz