Degrees of sheen - What gloss level should I select?


The Resene product range and Resene Total Colour System provides a huge variety of colours available in different gloss levels to suit all applications.

Gloss paints have a highly reflective smooth surface and are easier to clean than paints with less surface smoothness. They are ideal for areas exposed to heavy traffic or heavy use, especially where fingerprints, grease or grime are common. Colours tinted into high gloss paints appear cleaner and more intense than colours tinted into flat paints. Due to their highly reflective appearance, gloss paints tend to highlight surface imperfections. If the surface to be painted is marred or irregular it is best to select a paint with less sheen. Gloss greater than 80% gloss: Resene Hi-Glo, Resene Enamacryl, Resene Super Gloss.

Semi-gloss paints have a slightly glossy appearance that is not as highly reflective as that of gloss paints. These types of finishes offer good stain resistance and are easy to clean. Paints with a semi-gloss appearance are excellent for use on many of the same areas as gloss paints. They are ideal for walls and woodwork that is subject to wear and on weatherboards and exterior cementitious surfaces. Semi-gloss 30-45%: Resene Sonyx 101, Resene Lustacryl, Resene Lusta-Glo.

Satin paints tend to impart more warmth and depth to surfaces than do flat paints. They are more stain resistant than flat paints, but less stain resistant than semi-gloss and gloss paints. Satin is also becoming a popular option for roofing. 20-30% gloss: Resene Summit Roof.

Low sheen paints are the most popular finish for interior broadwall areas and an ideal choice where some sheen is desired and good cleaning properties are necessary, such as in living areas, hallways, bedrooms and playrooms. Occasionally, these types of paints are used for ceilings; however, their slight sheen will tend to highlight surface imperfections. Outside low sheen finishes are most commonly used over timber, concrete and plaster finishes. Low sheen 3-19% gloss: Resene SpaceCote Low Sheen, Resene Zylone Sheen, Resene Lumbersider, Resene X-200.

Flat paints diffuse light, so they tend to conceal surface imperfections better than paints with higher sheen levels making them a good choice for general use on walls and ceilings, especially those that are dented or rough. Colours appear muddied and darker in a flat finish than in a glossier finish. 'Flat' finishes have a micro rough texture that may trap dirt and make cleaning more difficult than higher sheen paints. It is wise to use flat paints only in areas that do not tend to get soiled. Flat/matt less than 2%: Resene SpaceCote Flat, Resene Ceiling Paint.

The current trend in finishes sees semi-gloss and low sheen finishes replacing higher gloss finishes on exterior weatherboard, stucco and other uneven surfaces. On the interior, low sheen finishes are extending from broadwall living areas into well ventilated bathrooms and kitchens. A mix of gloss levels within one area is becoming a popular way to create a subtle visual effect or highlight feature areas.

See the Resene Recommended paint systems for the right paint system for your project.

Aesthetic
The gloss of a paint is essentially an aesthetic attribute, but with secondary technical implications. The vast majority of paint binders are inherently somewhat glossy and uniform reduction of gloss requires the precise disturbance of the surface of the film, so as to diffuse the incident light on it. By this definition flat paints are always rougher than glossier paints, even though this roughness is on a very small scale. Nonetheless this roughness and the way in which it is achieved affects the cleanability of the surface, the durability of the surface and the mechanical strength of that surface.

Durability
As a rule of thumb, within the same generic type of paint, glossier products will have more durability than their flatter counterparts. The rate of drop off in the durability of exterior waterborne paints with decreasing gloss is much less than that of solventborne paints and while very useful lives may be achieved with low gloss and flat waterborne paints outside, solventborne paints of the same degree of gloss would erode very rapidly.

Gloss uniformity
Gloss is not uniform over the range of viewing angles. Sheen paints may appear to be quite flat when viewed directly on (that is at 90û to the surface), but may have quite a high lustre when viewed along the surface. This may be quite significant when painting long rooms or corridors, particularly those which have a light source at one end.The chart below shows the relative levels of gloss between our decorative products as the eye sees them. In other words, Resene Sonyx 101 has a gloss level halfway between Resene Lumbersider and Resene Hi-Glo, while Resene Zylone Sheen is halfway between Resene SpaceCote Flat and Resene Lumbersider.

Gloss levels (%) measured at 60°C

Category

Typical gloss terminology
Full gloss 85% - 100%
Gloss 60% - 84%
Semi-gloss 20% - 59%
Low sheen 5% - 19%
Flat 0% - 4%
   

Our vision is to be respected as an ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile and Environmental Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties.. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

Australia:
PO Box 924, Beenleigh, Queensland 4207
Phone: 1800 738 383. Fax: 1800 064 960
Email: advice@resene.com.au. Web: www.resene.com.au
New Zealand:
PO Box 38242, Wellington Mail Centre, Lower Hutt 5045
Phone: +64 (4) 577 0500, 0800 RESENE (737 363), Fax: (04) 577 0600
Email: advice@resene.co.nz. Web: www.resene.co.nz

Stores

 

Resene Paints Ltd

Choose your Resene paint colours

 
Mobile site| What's new| Colours| Paint| Wallpaper| Curtains| Specifiers| Painters| DIY/Home| Artists| Kids| Order| Contact| Terms| Sitemap| Home| TOP