[an error occurred while processing this directive]

Resene stain and clears

- click to print this section
 
Resene Aquaclear

Resene Aquaclear
clear waterborne urethane varnish - interior - waterborne
Environmental Choice approved
Resene Aquaclear has been developed as a waterborne alternative to turps thinned oil modified urethanes. Where maximum abrasion resistance is required, such as high traffic floors, a moisture-cured urethane, such as Resene Polythane, is recommended.

Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers.

Resene Aquaclear Natural

Resene Aquaclear Natural
waterborne clear – flat natural finish

Environmental Choice approved
Resene Aquaclear Natural is a waterborne clear flat finish for interior timber walls and ceilings, designed to enhance and protect timber from everyday wear and tear. May also be used with Resene Colorwood Enhance to add extra depth and colour to timber. Available in a flat natural finish to allow the beauty of the timber to show through.

Typical uses: Interior timber walls and ceilings.

Resene Cemseal

Resene Cemseal
concrete sealer and dust coat - exterior/interior - waterborne
Environmental Choice approved
Resene Cemseal is a non-decorative coating for use on industrial and domestic concrete floors where a low cost, easily applied and maintained method of controlling concrete dusting is required.

Typical uses: Concrete.

Resene Clearcoat UVS protective glaze

Resene Clearcoat UVS
clear waterborne U.V. protective glaze - exterior - waterborne
Environmental Choice approved
Resene Clearcoat UVS is based on a unique acrylic-urethane for ease of application and maximum life over painted surfaces. Formulated with U.V. absorbers, Resene Clearcoat UVS filters out harmful U.V. light, protecting the underlying coloured coat. Ideally suited for direct application to freshly painted bright organic hues and shades to aid colour retention by protecting these more vulnerable pigments against fading.

Typical uses: All exterior waterborne acrylic coated surfaces except working joinery.

Resene Colorwood

Resene Colorwood
clear and coloured natural wood stain - interior - waterborne
Environmental Choice approved
Resene Colorwood is an exciting way of treating natural timbers and enhancing the grain. Gives coloured timbers with the see-through look as it allows the natural grain of all timbers to show through.

Typical uses: Canework, cork, doors, dressed and rough sawn timber, fibre and particle board, furniture, kitset and nursery furniture, panelling, rope, timber (imported and native), timber ceilings and beams, window and door frames.

Resene Colorwood Enhance

Resene Colorwood Enhance
stain enhancer - interior
Resene Colorwood Enhance is designed to add more depth to your timber stain colours. Choose from five Resene Colorwood Enhance shades and add to a product from the Resene Aquaclear or Resene Qristal ClearFloor range. Only a small amount is required to achieve a desirable coloured effect.

Typical uses: As part of a Resene Aquaclear or Resene Qristal ClearFloor finish.

Resene Colorwood Greywash

Resene Colorwood Greywash
greywash stain - interior - waterborne
Environmental Choice approved
Resene Colorwood Greywash is designed to give a greywash effect on new timber or old varnished interior timbers. It’s based on Resene Colorwood Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene Colorwood stain first, then overcoating with Resene Colorwood Greywash.

Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers.

Resene Colorwood Whitewash

Resene Colorwood Whitewash
whitewash stain - interior - waterborne
Environmental Choice approved
Resene Colorwood Whitewash is an exciting way of achieving a whitewash effect on new timber or old varnished interior timbers.

Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers.

Resene Concrete Clear waterborne glaze for masonry and bricks

Resene Concrete Clear
clear waterborne concrete coating - exterior/interior
Environmental Choice approved
Resene Concrete Clear is a tough waterborne glaze for use on masonry and brick surfaces to enhance its colour and natural beauty. It also increases the durability of high build waterborne specialist coatings. Resene Concrete Clear can also be used over solid colour or metallic decorative paint finishes.

Typical uses: Brickwork/artificial brickwork, fibre cement, high build acrylics, masonry surfaces, plaster.

Resene Concrete Stain

Resene Concrete Stain
coloured concrete stain - exterior/interior - solventborne
Resene Concrete Stain is a solventborne stain designed specifically for concrete and other cementitious substrates and brick. Penetrates into the substrate forming a low sheen finish that is both decorative and protective.

Typical uses: Brick, carports, cobblestones, concrete, driveways, garages, light industrial floors, paths, patios, steps, swimming pool surrounds, tile.

Resene Concrete Wax

Resene Concrete Wax
clear waterborne satin glaze - interior - waterborne
Environmental Choice approved
Resene Concrete Wax is a tough waterborne satin glaze for use on concrete floors and benchtops. Scratches are easily repairable and the surface maintained.

Typical uses: Concrete benchtops, concrete floors.

Resene Danska Teak Oil

Resene Danska Teak Oil
natural wood finish - interior - solventborne
Resene Danska Teak Oil is a highly 'refined' Linseed Oil product designed to bring out the grain of heart timbers such as Rimu and Teak and produces the most natural results when left uncoated. Recommended recoat is 2-3 months after initial application and thereafter as required.

Typical uses: Suitable for use on interior timber such as teak and most hard timbers such as Rimu, hardwood Mahogany and Walnut.

Resene Forester timber stain coating

Resene Forester
coloured timber stain coating - waterborne - exterior/interior
Environmental Choice approved
Resene Forester is a semi-transparent film forming timber stain effect finish based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Resene Forester is not suitable for direct application over timber and other bare substrates. It is designed for use over a specific basecoat colour on properly prepared substrates and particularly those with a wood grain effect. Also available with Resene CoolColour™ technology.

Typical uses: Pre-primed Shadowclad® Ultra, wood grain effect fibre cement, repaints, primed timber, primed weatherboards.

Resene Forester CoolColour

Resene Forester CoolColour
timber stain cooating - -waterborne - exterior/interior

Environmental Choice approved
Resene Forester CoolColour is a semi-transparent film forming timber stain effect finish based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up.

Typical uses: Pre-primed Shadowclad® Ultra, wood grain effect fibre cement, repaints, primed timber, primed weatherboards.

Resene Furniture and Decking Oil

Resene Furniture and Decking Oil
clear timber oil - exterior - solventborne
Resene Furniture and Decking Oil is designed for direct application to timber decks and furniture to enhance and restore the timber colour and provide protection against water, fungi, and U.V. light. The product is designed for annual application to keep decks and furniture in good condition and assist with water repellency.

Typical uses: New and weathered timber, timber outdoor furniture, wooden decks.

Resene Kwila Timber Stain

Resene Kwila Timber Stain
timber stain - exterior - solventborne
Resene Kwila Timber Stain is designed for direct application to new and weathered timber decks and furniture to enhance and restore the timber colour and provide protection against water, fungi, and U.V. light. As a penetrating material, Resene Kwila Timber Stain will regenerate wood fibres exposed by U.V. and weather attack and re-build them into a wood-like material.

Typical uses: New and weathered timber, timber outdoor furniture, wooden decks.

Resene Polythane

Resene Polythane
clear gloss polyurethane - interior - solventborne
Resene Polythane is a single pack hardwearing moisture-cured polyurethane. Optimum clear gloss finish for floors and hardwearing surfaces because of its unique combination of flexibility and abrasion resistance. Exceptional flow properties.

Typical uses: Concrete formwork, cork and parquet flooring, corridors, fibre and particle board, gymnasiums, halls, indoor courts, timber, work floors.

 

Resene ProSelect
timber flooring finishes

Resene ProSelect is a professional timber flooring finish blending system. This is a tough 2K low VOC waterborne polyurethane sealer and topcoat developed specifically for professional flooring contractors. It is designed to enhance and protect hardwood timber floors, while giving the contractor the ability to select the finish desired from a full or semi-gloss, all the way through to a natural or ultra matt.

Typical uses: Timber flooring.

See the Resene ProSelect Technical Information Centre for more details.

Resene Qristal Clear

Resene Qristal Clear
clear polyurethane - interior - solventborne
Resene Qristal Clear is a range of hardwearing single pack polyurethanes. Designed using the most modern urethane resin for ease of application and maximum flow. Resene Poly-Flat produces a low sheen wax-like finish with excellent grain filling and sanding properties. Resene Poly-Satin produces a rich hardwearing semi-gloss finish with excellent sanding properties. Resene Poly-Gloss dries to an extremely hard high gloss finish (the wet look). Best applied over Resene Poly-Flat or Resene Poly-Satin. Where a harder wearing surface is required, substitute Resene HD Poly-Satin for Resene Poly-Satin, or the full gloss Resene Polythane for Resene Poly-Gloss.

The Resene Qristal Clear range of Poly-Flat, Poly-Satin (excluding HD Poly-Satin) and Poly-Gloss is moving to a lower odour formulation in 2018.

Typical uses: Architraves, desks, doors, fibre and particle board, furniture, panelling, plywood, skirtings, timber, veneers.

Resene Qristal ClearFloor 1K

Resene Qristal ClearFloor 1K
clear waterborne flooring urethane - interior - waterborne
Resene Qristal ClearFloor 1K is a waterborne urethane durable satin flooring finish designed to protect your wooden flooring and keep it looking its best for longer. In high abrasion where a waterborne finish is required, use Resene Qristal ClearFloor 2K.

Typical uses: Timber or timber composite flooring.

Resene Qristal ClearFloor 2K

Resene Qristal ClearFloor 2K
clear waterborne flooring urethane - interior - waterborne
Resene Qristal ClearFloor 2K is a two component waterborne urethane durable flooring finish designed to protect your wooden flooring and keep it looking its best for longer.

Typical uses: Timber or timber composite flooring.

Resene Stone Strengthener

Resene Stone Strengthener
exterior - solventborne
Resene Stone Strengthener is a 100% active material that is designed to penetrate deep into friable stone or cementitious materials. Once there it utilises moisture in the air to deposit reinforcing silica into the matrix of the substrate. Ethyl alcohol is given off as a by-product of the reaction. See Data Sheet D904 for technical information.

Typical uses: Lightweight concrete, Oamaru stone, sandstone, weathered bricks, weathered plasters.

Resene Timber and Furniture gel

Resene Timber and Furniture Gel
coloured timber gel - exterior/interior - waterborne
Resene Timber and Furniture Gel is a non-drip, easy to apply, waterborne gel-stain designed for use on a wide variety of new and weathered timber surfaces, including furniture, both inside and out.

Typical uses: Timber furniture, timber planters, small decorative timber areas and features.

Resene Walk-on Concrete Clear

Resene Walk-on Concrete Clear
protection for concrete and pavers - waterborne - exterior
Environmental Choice approved
Resene Walk-on Concrete Clear is based on tough waterborne resins to give maximum abrasion resistance in a single pack satin finish on concrete surfaces subject to foot traffic.

Typical uses: Exterior domestic surfaces and light industrial surface areas

Resene Walk-on Concrete Clear Wet Look

Resene Walk-on Concrete Clear Wet Look
protection for concrete and pavers - solventborne - exterior
Resene Walk-on Concrete Clear Wet Look is a solventborne gloss clear designed to achieve a wet look on substrates subject to pedestrian and light vehicular traffic. It penetrates into the concrete to highlight the colour patina of concrete.

Typical uses: Brick, cobblestones, concrete, driveways, light industrial floors, paths, patios, steps, swimming pool surrounds and unglazed tiles.

Resene Waterborne Woodsman

Resene Waterborne Woodsman
coloured penetrating oil stain - exterior - waterborne
Environmental Choice approved
Resene Waterborne Woodsman is a waterborne woodstain matching the needs of timber to the desire to achieve the most natural appearance possible. Designed for exterior timber in a wide range of colours. Resene does not recommend clear stains on exterior timber as it does not provide sufficient protection for the timber against the weather. Decorators will enjoy the quick and easy water clean up and the absence of the solvent fumes and VOCs associated with traditional solventborne stains.

Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture.
Resene Waterborne Woodsman CoolColour

Resene Waterborne Woodsman CoolColour™
coloured penetrating oil stain - exterior - waterborne
Environmental Choice approved
Resene Waterborne Woodsman is a waterborne woodstain matching the needs of timber to the desire to achieve the most natural appearance possible. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up. Designed for exterior timber in a wide range of colours. Resene does not recommend clear stains on exterior timber as it does not provide sufficient protection for the timber against the weather.

Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture.

Resene Woodsman Decking Oil Stain

Resene Woodsman Decking Oil Stain
coloured penetrating oil stain - exterior - waterborne
Environmental Choice approved
Tired weathered timber decks can be quickly rejuvenated with new Resene Woodsman Decking Oil Stain, a hybrid waterborne alkyd stain developed especially for new and weathered decking. Resene Woodsman Decking Oil Stain is available in a wide range of colours including Resene CoolColours. Resene does not recommend clear stains on exterior timber as it does not provide sufficient protection for the timber against the weather.

Typical uses: Timber decks.

Resene Woodsman Whitewash

Resene Woodsman Greywash
penetrating oil stain - exterior - waterborne
Environmental Choice approved

Resene Woodsman Whitewash is an exciting way of achieving a greywash effect on new or weathered exterior timber. It’s based on Resene Woodsman Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene wood stain first, then overcoating with Resene Woodsman Greywash.

Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture and decks.

Resene Woodsman Whitewash

Resene Woodsman Whitewash
whitewash penetrating oil stain - exterior - waterborne
Environmental Choice approved
Resene Woodsman Whitewash is an exciting way of achieving a whitewash effect on new or weathered exterior timber.

Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture and decks.



Resene Woodsman

Resene Woodsman Wood Oil Stain
coloured penetrating wood oil stain - exterior - solventborne
Resene Woodsman Wood Oil Stain is a penetrating solventborne wood oil stain matching the needs of timber to the desire to achieve the most natural appearance possible. Suitable for exterior timber including trafficable areas such as decks.

Typical uses: Beams, fences, garden furniture, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. Can be used on decks.

Resene Woodsman is also available with CoolColour technology to help darker colours stay cooler.

Resene XC-700

Resene XC-700
clear high build concrete and masonry finish - exterior
Environmental Choice approved
Resene XC-700 is a clear high build finish designed to seal concrete and masonry walls for a lightly textured 'natural look' finish. This is a controlled distribution product - see your Resene representative or Resene ColorShop.

Typical uses: Concrete masonry, honed concrete walls.

  Return to product lists