Resene finishing products range

Resene AquaLAQ Colour Coat
waterborne interior
Environmental Choice approved
Resene AquaLAQ Colour Coat is a single pack waterborne satin acrylic with an extremely durable finish and excellent UV resistance. New generation rheology provides easier application. Fast drying, it is designed to be touch dry in minutes, with a smooth silky feel. Enjoy low odour and low VOC with this product. Topcoat with Resene AquaLAQ Clear Coat or Resene two pack urethanes if required.

Resene AquaLAQ Colour Coat is available in a huge range of colours from the Resene Total Colour System enabling you to achieve your desired Resene colour finish. Special colours can be custom made or matched on request for you.

Typical uses: Kitchens, bathrooms, shop fittings, doors, furniture, blinds. Usually used by professional spray applicators.

Recommended as part of the Resene AquaLAQ system – find out more about Resene AquaLAQ.

Resene Blacktop
driveway coating - exterior - waterborne
Environmental Choice approved
Resene Blacktop is a cold applied, heavy-bodied, slip-resistant topping for rejuvenating aged or worn asphalt. Based on a bitumen emulsion with graded fillers that dries to produce a durable, weather and wear resistant finish.

Typical uses: Asphalt driveways, asphalt paths, asphalt playgrounds, asphalt recreational areas, asphalt tennis courts.

Resene Ceiling Paint
waterborne flat paint - interior - waterborne
Environmental Choice approved
Resene Ceiling Paint is recommended for use on ceilings of living rooms, bedrooms and dining rooms where a flat finish is required. A very low odour, low spatter, low VOC product.

Typical uses: Fibrous plaster, paperfaced plasterboard (GIB®, Gyprock®), plaster glass, repaints. Not recommended for wet areas (bathrooms, kitchens and laundries - use Resene SpaceCote Low Sheen or Resene SpaceCote Low Sheen Kitchen & Bathroom).

Karen Walker Chalk Colour
matte waterborne paint
Add colour, upcycle or rejuvenate walls, furniture, ceilings and accessories with matte Karen Walker Chalk Colour from Resene. We’ve combined Karen Walker’s beautiful colour range with Resene’s paint technology so you can bring out the best in your home with a luxurious matte finish. For most surfaces, simply wipe down and start painting – no priming, sanding or sealing needed. Depending on the look you want to create, apply 1-2 coats of Karen Walker Chalk Colour and finish with Karen Walker Soft Wax or Vintage Wax if you wish. May also be tinted to a range of Resene colours off white, light and ultra deep.

Typical uses: Walls, furniture, ceilings and accessories. Designed for all small areas; paint is available in 500ml and 1L sizes, wax in 250ml size.

Resene Cleancote
dirt and mould resistant paint – exterior/interior - waterborne
Resene Cleancote is a dirt-resistant waterborne paint finish optimised for superior exterior durability and adhesion, combined with superb mould resistance. Formulated for hot climates, tropical conditions and offshore buildings exposed to heavy rainfall.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, solid plaster, primed galvanised steel.

Resene ClinicalCote
waterborne low sheen and waterborne flat paint - interior - waterborne
Environmental Choice approved, Sensitive Choice approved
Resene ClinicalCote is a low odour, washable waterborne paint finish formulated with anti-microbial silver for use on broadwall areas in buildings such as hospitals, rest homes, medical centres and clinics. In keeping with the modern trend of low sheen finishes, Resene ClinicalCote is available in both low sheen and satin finishes. It is designed to withstand alcohol and glycol containing hospital cleaners to keep it looking its best. The low sheen has a desirable low sheen finish from all angles. The painted surface can be cleaned just seven days after application.

Typical uses: Interior walls and ceilings.

Resene Contractor
waterborne high build paint - exterior/interior - waterborne
Environmental Choice approved
Resene Contractor is a new approach using advanced design polymers to achieve increased film build with standard application techniques. Skilled tradesperson-like application of the unthinned product will usually achieve complete hiding in one application. Based on wet-adhesion modified polymers for use over a wide variety of surfaces.

Typical uses: Block and brickwork, cement plaster, concrete, fibre and particle board, fibre cement, primed galvanised steel, primed timber, repaints, sealed paperfaced plasterboard (GIB®, Gyprock^®), sealed plaster glass, stucco, timber, wallpaper.

Resene CyberCote
flat waterborne paint - interior - spray application
Resene CyberCote is designed to produce a tough interior flat finish on broadwall and ceiling areas (excludes wet areas).

Typical uses: Ceilings and walls.

This product was previously known as Cybercoat.

Resene Earthsense Ceiling Paint
flat waterborne paint - interior – waterborne
Environmental Choice approved
Resene Earthsense Ceiling Paint is a waterborne alkyd flat ceiling paint formulated with a special renewable extender pigment, providing at least 20% by volume of Renewable Raw Materials (RRM) of the final paint film. RRM calculated after application and evaporation of water.

Typical uses: Ceilings.

Resene Enamacryl
gloss waterborne enamel paint - exterior/interior - waterborne
Environmental Choice approved
Resene Enamacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up.

Typical uses: Window and door trim, panels and joinery.

Resene Enamacryl CoolColour™
gloss waterborne enamel paint - exterior - waterborne
Environmental Choice approved
Resene Enamacryl CoolColour is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark roofing colours.

Typical uses: Window and door trim, panels and joinery.

Resene FilmPro
professional set paint - exterior/interior - waterborne
Environmental Choice approved
Lord of the Rings, King Kong and The Last Samurai didn't just have multi-million dollar budgets in common, they also shared a common use of Resene paints and colours to decorate a myriad of sets and props. A supplier to the industry for some years, Resene has learnt to tip technology on its head creating specialised coatings that will create thick ridges in paint, aged effects, and encourage the growth of mould, problems that normally cause paint chemists recurring nightmares. Having tackled the weird and wonderful, Resene paint chemists focused their attention on a range of set colours commonly used by professional set designers and painters.

Resene FilmPro is a tough waterborne finish designed to colour and enhance sets. Available in a standard range of colours, digital blue and green and reduction and clear bases. The new range may be intermixed or reduced to ensure the set professional can deliver exactly the colour the director demands for the perfect backdrop to their scene.

Typical uses: A versatile product designed to go over the wide variety of materials used in set design.

Resene Fireguard
intumescent coating - interior - waterborne
Resene Fireguard is an intumescent coating designed to improve the early fire hazard of various inflammable substrates. Designed to provide this protective effect while maintaining the ease of application and aesthetic appeal of a good quality decorative coating.

Typical uses: Any surface where fire protection is required along with a decorative paint finish.

Resene Fresh Air Carparking
pollution eating paint - interior - waterborne
Environmental Choice approved
Resene Fresh Air Carparking is a semi-transparent waterborne satin topcoat with photocatalytic pigments. Designed to break down NOx and organic atmospheric pollutants that come into contact with the film. Apply as a thin topcoat over a white substrate. This product has been designed for use in interior carparks. Activity is increased with increasing light flux.

Typical uses: Brick, concrete, carparking areas, fibre cement.

Resene FX Blackboard Paint
waterborne paint - exterior/interior - waterborne
Environmental Choice approved
Painting a kid's room or maybe a sidewalk cafè? Add a blackboard to your plans with Resene FX Blackboard Paint and you'll have a very handy extra feature for a very minimal cost.

Resene FX Blackboard Paint is a premium washable waterborne coating for interior and exterior smooth wallboards and panels where a hardwearing blackboard coating is required. Available in black or use Resene FX Chalkboard Paint for a range of Resene colours. Use only with high quality blackboard chalk using a blackboard duster or soft cloth to remove chalk. If you wish to use Liquid Chalk, use a Resene FX Write-On Wall Paint system instead of Resene FX Blackboard Paint.

Typical uses: Interior and exterior smooth wallboards and panels where a hardwearing blackboard paint coating is required.

Resene FX Chalkboard Paint
waterborne paint - exterior/interior – waterborne
Environmental Choice approved
Resene FX Chalkboard Paint is a premium washable waterborne coating for interior and exterior smooth wallboards and panels where a hardwearing chalkboard coating is required. Available tinted to a range of Resene colours, or for black use Resene FX Blackboard Paint. Use only with high quality blackboard chalk using a blackboard duster or soft cloth to remove chalk. If you wish to use Liquid Chalk, use a Resene FX Write-On Wall Paint system instead of Resene FX Chalkboard Paint.

Typical uses: Interior and exterior smooth wallboards and panels where a hardwearing blackboard paint coating is required.

Resene FX Faux Rust Effect
exterior/interior – non contact areas only
Resene FX Faux Rust Effect is a waterborne coating used to create a rust style effect on exterior and interior surfaces. Once applied, it looks like rust, a look that will continue to develop as the coating ages. Leave it as is or protect it with a clear finish of diluted Resene Waterborne Aquapel. It’s best used in non-contact areas. Always work on a sample area first, applying two coats of Resene FX Faux Rust Effect basecoat then two coats of the Resene FX Faux Rust Effect Activator to set off the rusting effect. The colour intensity and variation of the rust effect depends on the application method. The sooner the activator is applied after the basecoat is tacky, the deeper the rust effect.

Typical uses: Blockwork concrete, fibre cement, G.R.C. panels, primed timber and solid plaster.

Resene FX Fluoro
exterior/interior waterborne
Environmental Choice approved
There’s nothing quite like a shot of fluorescent to really make something stand out and attract attention. Recreate the high vis highlighter pen look on walls and art with Resene FX Fluoro paint. Available in five colours - blue, green, yellow, orange and pink.

Typical uses: Ideal for use for after dark events and locations with blacklight, or for a striking finish during the day.

Resene FX Metallic (was known as Resene Enamacryl Metallic)
waterborne metallic effect paint - exterior/interior - waterborne
Environmental Choice approved
Resene FX Metallic is a breakthrough product that may be used in all those areas traditionally reserved for solventborne enamels to achieve a metallic effect.

Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames.

View recommended application techniques available on the Resene Metallics & Special Effects chart or online.

Resene FX Nightlight
exterior/interior waterborne
Resene FX Nightlight is a waterborne glow in the dark paint designed to shine after the lights have gone out. Glow in the dark by night, pale yellow by day. The paint will glow when the lights go and then the glow will slowly wane. Simply apply 2-3 coats over a white basecoat, such as Resene Lumbersider, for optimum effect. For exterior use, finish with Resene Clearcoat UVS for added exterior durability.

Typical uses: Safety signs, children's areas, step edges or anywhere a glow in the dark effect may be required.

Resene FX Paint Effects Medium
waterborne effects finish - exterior/interior - waterborne
Environmental Choice approved
Resene Paint Effects Medium is a tintable acrylic used to obtain a variety of broken paint finishes, such as Ragging, Sponging and Limewash Effect. Resene Paint Effects Medium is always used in conjunction with a basecoat tinted to a selected colour. The choice of basecoat will depend whether it is an interior or exterior application. Resene Paint Effects Medium provides the end user with a unique alternative to traditional wallcoverings offering an infinite number of colour combinations.

Typical uses: Blockwork, concrete, fibre cement, G.R.C. panels, primed timber, solid plaster, wallboards.

Resene FX Pearl Shimmer
waterborne pearlescent glaze - exterior/interior - waterborne
Environmental Choice approved
Resene Pearl Shimmer is a waterborne pearlescent glaze ideal for creating soft iridescent shimmering wall finishes and softly sparkled features to add visual interest and diversity to any colour scheme.

Designed for interior and exterior use, Resene Pearl Shimmer may be applied over a standard new paint system such as two coats of Resene Lumbersider or directly over an existing sound coloured surface. Used in conjunction with a tinted basecoat, Pearl Shimmer filters the basecoat colour through the pearlescent glaze to give a unique finish on a wide variety of substrates, including trim and joinery. The large selection of basecoat and application options offers an almost infinite selection of colours and finishes. The pearlescent glaze can be lightly tinted using the Resene Total Colour System allowing a two tone effect to be achieved.

The most accentuated pearlescent effect will be achieved in combination with a textured basecoat, a well-planned lighting scheme and/or a curved surface. As the final appearance will vary depending on the basecoat colour and method of application, always agree on a sample panel before commencing work.

With just one coat required to achieve the softly shimmering effect, Resene Pearl Shimmer is a very efficient way to add a unique special effect to the finish with the added benefit of an extra protective layer on the paint system.

Typical uses: Architraves, bathrooms, cementitious surfaces, furniture, kitchens, laundries, paperfaced plasterboard (GIB®, Gyprock®), plywood, skirtings, timber doors, wallboards, window frames.

Resene FX Write-on Wall Paint
whiteboard coating - interior
Write on your walls with whiteboard markers without damaging the surface with Resene FX Write-on Wall Paint. Resene FX Write-on Wall Paint is a two component waterborne clear coating designed to produce a whiteboard effect over previously painted or sealed substrates.

Typical uses: Interior smooth wallboards and panels where a whiteboard style finish is required. May be applied over your choice of Resene colour to get a coloured whiteboard.

Resene Grassmarking Paint
exterior – waterborne
Environmental Choice approved
Resene Grassmarking Paint is a waterborne paint suitable for marking out lines and field areas on grass without harming the grass itself. Depending on the concentration required, Resene Grassmarking Paint may be thinned by 2-3 parts water making it a cost-effective option for all field marking projects.

Typical uses: Grass.

Resene High Temp Black Enamel
solventborne
Resene High Temp Black Enamel is a flat, high heat coating formulated using heat resistant pigments in a silicone polymer resin that provides excellent colour retention and film integrity at working temperatures up to 538°C. This coating is designed for use on both ferrous and non-ferrous metal surfaces and is ideal to coat areas of wood stoves, flues, heaters, barbecues and other metal surfaces that are exposed to high temperatures. Do not use in areas with direct flame exposure. Resene High Temp Black Enamel gives good rust resistance when fully cured.

Typical uses: Ferrous and non-ferrous metal surfaces, such as wood stoves, flues, heaters, barbecues and other metal surfaces that are exposed to high temperatures.

Resene Hi-Glo
waterborne gloss paint - exterior - waterborne
Environmental Choice approved
Resene Hi-Glo is based on a unique waterborne emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces. Resene Hi-Glo has a high gloss finish that allows for ease of cleaning as dirt and salts can be washed off more easily than lower gloss finishes.

Available in a wide range of Resene colours and a selected range of Micaceous and Aluminium metallic finish for added durability.

Typical uses: Aluminium, block and brickwork, concrete and plaster, fibre cement, galvanised steel roofing and cladding, particle board, plywood, repaints, roughcast/stucco, timber, UPVC surfaces, weatherboards, Zincalume.

Resene Hi-Glo CoolColour™
waterborne gloss paint - exterior - waterborne
Environmental Choice approved
Resene Hi-Glo CoolColour is based on a unique waterborne emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces. Resene Hi-Glo CoolColour has a high gloss finish that allows for ease of cleaning as dirt and salts can be washed off more easily than lower gloss finishes. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark roofing colours.

Available in a wide range of Resene colours and a selected range of Micaceous and Aluminium metallic finish for added durability.

Typical uses: Aluminium, block and brickwork, concrete and plaster, fibre cement, galvanised steel roofing and cladding, particle board, plywood, repaints, roughcast/stucco, timber, UPVC surfaces, weatherboards, Zincalume.

Resene Lumbersider
waterborne low sheen paint - exterior/interior - waterborne
Environmental Choice approved
Resene Lumbersider is a waterborne low sheen paint based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish.

Typical uses: Beams, block and brickwork, concrete and plaster, decks, fibre and particle board, fibre cement, galvanised iron, repaints, stucco/roughcast, timber, wallboards, wallpaper, weatherboards.

Resene Lumbersider CoolColour™
waterborne low sheen paint - exterior – waterborne
Environmental Choice approved
Resene Lumbersider is a waterborne low sheen paint based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish. Resene Cool Colour technology performs optimally on dark colours that are the most prone to heat build-up.

Typical uses: Beams, block and brickwork, concrete and plaster, decks, fibre and particle board, fibre cement, galvanised iron, repaints, stucco/roughcast, timber, weatherboards. 

Resene Lusta-Glo
semi-gloss enamel paint - interior - solventborne
Resene Lusta-Glo dries to a beautiful, even, silky semi-gloss finish. Based on a tough solventborne resin to give fast drying and maximum durability in all hardwearing areas.

Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood and wallboards, skirtings, timber doors, window frames.

This product is also available as a waterborne alkyd version, Resene Waterborne Lusta-Glo.

Resene Lustacryl
semi-gloss waterborne enamel paint - exterior/interior - waterborne
Environmental Choice approved
Resene Lustacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up.

Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames.

Resene Lustacryl Commercial Spray Grade
semi-gloss waterborne enamel – exterior/interior - waterborne
Resene Lustacryl Commercial Spray Grade is a semi-gloss waterborne enamel that may be used in all areas traditionally reserved for solventborne enamels. Non-yellowing and fast set up at higher application thicknesses with easy water clean up.

Typical uses: Bathrooms, furniture, kitchens, laundries, plywood, skirtings, solid timber doors/joinery and wallboards.

Resene Lustacryl CoolColour™
semi-gloss waterborne enamel paint - exterior - waterborne
Environmental Choice approved
Resene Lustacryl CoolColour is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-ups.

Typical uses: Window and door trim, panels and joinery.

Resene Lustacryl Kitchen & Bathroom
semi-gloss waterborne enamel paint - interior - waterborne
Environmental Choice approved, Sensitive Choice approved
Resene Lustacryl Kitchen & Bathroom combines the benefits of a waterborne enamel with added anti-bacterial silver protection and MoulDefender. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a semi-gloss finish with added protection. So adaptable that it may also be used on joinery and trim.

Anti-bacterial silver protection was chosen because it is a safe method of deodorising and sanitising surfaces that come in contact with skin, food and water.

Typical uses: Bathrooms, kitchens, laundries, skirtings, timber doors, trim and joinery, window frames.

Resene Non-Skid Deck & Path
waterborne non-skid paint - exterior/interior - waterborne
Environmental Choice approved
Resene Non-Skid Deck & Path is a textured waterborne finish, designed to provide a comfortable walking surface for all interior and exterior situations where a non-skid finish is desired. Available in a desirable low sheen finish, Resene Non Skid Deck & Path may be tinted to complement existing dècor, both inside and out. The finish has a comfortable grit texture to give feet and shoes something to grip onto, reducing the risk of accident no matter what the weather.

Combinations of contrasting colours may be used to create decorative effects in courtyards and pathed areas, either as part of a new landscaping plan or to rejuvenate weathered surfaces. Light colours are perfect for stair edges to highlight the edge and reduce the likelihood of accident. Quick and easy to apply, trafficable areas may be upgraded and coloured with minimal disruption and maximum style.

A short shower or errant splash and swimming pool surrounds, decked areas and steps can become dangerous. Surfaces that were non-slip when dry suddenly become a slippery slide when water or wet feet are added to the equation. Resene Non-Skid Deck & Path has been slip resistance tested with a result of 0.74-0.78, which means it meets slip resistance requirements for slopes up to 34 degrees. An extremely tough finish, Resene Non-Skid Deck & Path may be used in residential, commercial or industrial light wear applications.

Selected colours are also available in Resene CoolColour™ technology.

Rated 5 stars out of 5 in the Consumer NZ test of anti-slip finishes.

Typical uses: Bitumen, concrete, decks, paths, steps, timber, foot trafficable areas.

Resene Room Velvet
low sheen waterborne alkyd paint - interior - waterborne
Environmental Choice approved
Resene Room Velvet dries to a beautiful, even, silky low sheen finish. Based on a tough flexible hybrid waterborne-alkyd resin to give fast drying and durability in all hardwearing areas. This lower odour formulation is easy to apply and dries without the unwanted and strong solvent odours associated with traditional solventborne products.

Typical uses: Walls and ceilings especially in wet areas such as bathrooms, kitchens and laundries, architraves, plywood, skirtings, wallboards.

Note: Resene Room Velvet was originally available as a low sheen enamel finish, but has been reformulated and released as a waterborne alkyd version in Spring 2019. Make sure you read the correct instructions for the product you are using. To view the old label, old SDS and old TDS, please click here.

Resene Scumbling Glaze (Mix)
effects finish - interior - solventborne
Resene Scumbling Glaze is a solventborne alternative to Resene Paint Effects Medium. Suitable for use in wet areas, such as bathrooms, or where a slower dry time is preferred. Paint finishes, such as Ragging, Sponging and Limewash Effect, are obtained by the contrast of basecoat and Resene Scumbling Glaze. Resene Scumbling Glaze is always used in conjunction with a basecoat tinted to a selected colour. Resene Scumbling Glaze is made by mixing Resene Qristal Clear Poly-Flat with 15% mineral turps. Stir well before adding the colour/s of your choice.

Typical uses: Blockwork, concrete, floors, primed timber, solid plaster, wallboards.

Resene Sonyx 101
waterborne semi-gloss paint - exterior/interior - waterborne
Environmental Choice approved
Resene Sonyx 101 is a member of a new generation family of waterborne coatings optimised for superior toughness, durability and adhesion, combined with superb flowing good looks. Resene Sonyx 101 is the perfect compromise for a less than perfect exterior substrate balancing the need for cleanability with an ability to hide surface imperfections.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed galvanised steel, primed timber, solid plaster, wallboards.

Resene Sonyx 101 CoolColour™
waterborne semi-gloss paint - exterior - waterborne
Environmental Choice approved
Resene Sonyx 101 is a member of a new generation family of waterborne coatings optimised for superior toughness, durability and adhesion, combined with superb flowing good looks. Resene Sonyx 101 is the perfect compromise for a less than perfect exterior substrate balancing the need for cleanability with an ability to hide surface imperfections. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed galvanised steel, primed timber, solid plaster.

Resene SpaceCote Flat
flat waterborne enamel paint - exterior/ interior - waterborne
Environmental Choice approved
Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. It may also be used in projects where an open plan living area extends into an 'exterior' sheltered/roofed living area where a seamless finish is desired for both areas.

Typical uses: Architraves, bathrooms, ceilings, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames.

Resene SpaceCote Flat CoolColour™
flat waterborne enamel paint - exterior - waterborne
Environmental Choice approved
Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed timber, solid plaster.

Resene SpaceCote Flat Fly Deterrent
flat waterborne enamel paint - interior - waterborne
Environmental Choice approved
Resene SpaceCote Flat Fly Deterrent brings style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. It is designed to discourage flies from sitting on areas painted with this product minimising the appearance of fly spots and keeping the paint finish looking its best for longer. Extensive testing by an accredited laboratory has shown significant reductions in the number and size of fly spots compared to standard paint systems.

Musca domestica, the housefly, is a well known cosmopolitan pest responsible for transporting disease carrying organisms and damaging surfaces. When resting, adults regurgitate a liquid that results in spots on the surface combined with other darker spots, both of which can be difficult to remove without damaging the paint surface. The flies are inactive at night and tend to congregate on ceiling areas. The less flies sit, the fewer and smaller the fly spotting.

Resene SpaceCote Flat Fly Deterrent combines all the benefits and performance of Resene SpaceCote with the added bonus of reduced fly spotting. Available exclusively from Resene in white and a wide range of colours off white.

Typical uses: Architraves, ceilings, plywood, skirtings, wallboards, window frames.

Resene SpaceCote Flat Kitchen & Bathroom
flat waterborne enamel paint - interior flat - waterborne
Environmental Choice approved, Sensitive Choice approved
Resene SpaceCote Flat Kitchen & Bathroom combines the benefits of a waterborne enamel with added anti-bacterial silver protection and MoulDefender. Designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas.

Anti-bacterial silver protection was chosen because it is a safe method of deodorising and sanitising surfaces that come in contact with skin, food and water.

Typical uses: Bathrooms, ceilings, kitchens, laundries.

Resene SpaceCote Flat Commercial Spray Grade
flat waterborne enamel paint - interior - waterborne
Environmental Choice approved
Resene SpaceCote Flat Commercial Spray Grade is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Designed for efficient spray application to enable quicker job completion. Adaptable and suitable for a wide range of projects, including interior wet areas.

Typical uses: Bathrooms, furniture, kitchens, laundries, plywood, skirtings, wallboards.

Resene SpaceCote Low Sheen
low sheen waterborne enamel paint - interior - waterborne
Environmental Choice approved
Resene SpaceCote Low Sheen is the result of long, careful, intensive research. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a low sheen finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas.

Reduced side sheen minimises the appearance of surface imperfections, although Resene Broadwall Surface Prep or Resene Broadwall 3 in 1 must still be used as a skim coat to achieve a Level 5 finish.

Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, wallboards, window frames.

Resene SpaceCote Low Sheen Kitchen & Bathroom
low sheen waterborne enamel paint - interior - waterborne
Environmental Choice approved, Sensitive Choice approved
Resene SpaceCote Low Sheen Kitchen & Bathroom combines the benefits of a waterborne enamel with added anti-bacterial silver protection and MoulDefender. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a low sheen finish with added protection. Very adaptable, it can also be used on interior wet areas.

Anti-bacterial silver protection was chosen because it is a safe method of deodorising and sanitising surfaces that come in contact with skin, food and water.

Typical uses: Bathrooms, kitchens, laundries, trim and joinery, window frames.

Resene Summit Roof Commercial Spray Satin
roof paint - exterior - waterborne
Environmental Choice approved
Resene Summit Roof Commercial is a spray only version, designed for ease of spray application and maximum life over properly prepared metal surfaces and cementitious surfaces.

Typical uses: On properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs.

Use with Resene Summit Roof Commercial Brushing Additive when applying by brush, for small areas only.

Resene Summit Roof Commercial Spray Satin CoolColour
roof paint - exterior - waterborne
Environmental Choice approved
Resene Summit Roof Commercial is a spray only version, designed for ease of spray application and maximum life over properly prepared metal surfaces and cementitious surfaces. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.

Typical uses: On properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs.

Use with Resene Summit Roof Commercial Brushing Additive when applying by brush, for small areas only.

Resene Summit Roof Metallic
waterborne metallic finish roof paint - exterior - waterborne
Environmental Choice approved
Resene Summit Roof Metallic is a waterborne roof paint available in micaceous iron oxide (MIOX) and aluminium finishes designed for ease of application and maximum life.

Typical uses: Direct to properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs.

Resene Summit Roof Semi-Gloss
semi-gloss roof paint - exterior/interior - waterborne
Environmental Choice approved
Resene Summit Roof is a unique waterborne semi-gloss for ease of application and maximum life over properly prepared metal surfaces and cementitious surfaces. It’s available in a wide range of colours including Resene paint matches to popular COLORSTEEL®/COLORBOND® colours plus a whole host of Resene colours.

Typical uses: On properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs.

Use with Resene Summit Roof Spray Additive when applying by airless spray.

Resene Summit Roof Semi-Gloss CoolColour™
semi-gloss roof paint - exterior/interior - waterborne
Environmental Choice approved
Resene Summit Roof is a unique waterborne semi-gloss for ease of application and maximum life over properly prepared metal surfaces and cementitious surfaces. It’s available in a wide range of colours including Resene paint matches to popular COLORSTEEL®/COLORBOND® colours plus a whole host of Resene colours. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.

Typical uses: Direct to properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs.

Use with Resene Summit Roof Spray Additive when applying by airless spray.

Resene Super Gloss
gloss enamel paint - exterior/interior - solventborne
Resene Super Gloss is based on a tough solventborne resin for fast drying and maximum durability in all hardwearing areas. Easy to apply and dries to a mirror gloss finish.

Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood and wallboards, skirtings, timber doors, window frames.

Resene Super Gloss is also available with CoolColour technology to help darker colours stay cooler.

Resene Tennis Court Coating
textured finish - exterior/interior - waterborne
Environmental Choice approved
Resene Tennis Court coating is a waterborne coating filled with graded silicas. Designed for use on both concrete and composite courts to give a durable, tough topping with excellent traction and even bounce properties.

Typical uses: Bitumen, concrete, tennis courts.

Resene Walk-on
satin flooring and paving paint - exterior/interior - waterborne
Environmental Choice approved
Resene Walk-on is a satin general purpose flooring and paving paint, based on tough acrylic resins to give maximum durability and abrasion resistance in a single pack finish. It’s ideal for use on steps, decking, concrete, porches, suitably primed timber, composite boards and interior floors. This product has replaced solventborne and waterborne Resene Sidewalk.

Typical uses: Composite board, concrete, decks, fibre cement, particle board, steps, timber, foot trafficable areas.

Resene Walk-on CoolColour™
satin flooring and paving paint - exterior/interior - waterborne
Environmental Choice approved
Resene Walk-on is a satin general purpose flooring and paving paint, based on tough acrylic resins to give maximum durability and abrasion resistance in a single pack finish. It’s ideal for use on steps, decking, concrete, porches, suitably primed timber, composite boards and interior floors. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark colours outside. This product has replaced solventborne and waterborne Resene Sidewalk. 

Typical uses: Composite board, concrete, decks, fibre cement, particle board, steps, timber, foot trafficable areas.

Resene Waterborne Lusta-Glo
semi-gloss waterborne alkyd paint - interior – waterborne
Resene Lusta-Glo dries to a beautiful, even, silky semi-gloss finish. Based on a tough flexible hybrid waterborne-alkyd resin to give fast drying and durability in all hardwearing areas. Can be used for wet areas where a durable and attractive finish is required. This lower odour formulation is easy to apply and dries without the unwanted and strong solvent odours associated with traditional solventborne products.

Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood and wallboards, skirtings, timber doors and window frames.

This product is also available as a solventborne version, Resene Lusta-Glo.

Resene Wintergrade Lumbersider
low temperature curing low sheen paint - exterior - waterborne
Environmental Choice approved
Resene Wintergrade Lumbersider is designed to cure at very low temperatures down to 2°C. Based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish.

Typical uses: Beams, block and brickwork, concrete and plaster, decks, fibre and particle board, fibre cement, galvanised iron, repaints, roughcast/stucco, timber, wallboards, wallpaper, weatherboards.

Resene Wintergrade Sonyx 101
low temperature curing semi-gloss paint - exterior - waterborne
Environmental Choice approved
Resene Wintergrade Sonyx 101 is designed to cure at very low temperatures down to 2°C. Based on a tough waterborne resin to ensure maximum durability in all exposed conditions.

Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed galvanised steel, primed timber, solid plaster, wallboards.

Resene Zylone Sheen
waterborne low sheen paint - interior - waterborne
Environmental Choice approved
Resene Zylone Sheen is the result of advanced technology that produces a smooth yet ultra tough surface. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. A very low odour product.

Typical uses: Block and brickwork, concrete and plaster, fibre and particle board, fibre cement, fibrous plaster, paperface plasterboard (GIB®, Gyprock®), timber, wallpaper, wallboards, woven wallcoverings.

Resene Zylone Sheen Zero - with no added VOCs
waterborne low sheen paint - interior - waterborne
Environmental Choice approved, Sensitive Choice approved
Resene Zylone Sheen Zero is the result of advanced technology that produces a smooth yet ultra tough surface. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. A very low odour product with no added VOCs.

Typical uses: Block and brickwork, concrete and plaster, fibre and particle board, fibre cement, fibrous plaster, paperface plasterboard (GIB®, Gyprock®), timber, wallpaper, wallboards, woven wallcoverings.