Feedback
Resene Paints - home page

Painting stucco, render, plaster, in-situ concrete and fibre cement


Resene Popular Paint Systems –
Concrete, plasters and cement-based substrates: training notes

This web page is an edited version of the Resene Best System Selling training notes provided to Resene staff and is provided to enable you to gain a greater understanding of the substrates and paint systems you may encounter in your decorating project. It is impossible to cover all decorating scenarios in a single document, so if you are in doubt about any aspect of your project please contact Resene for assistance.

How to paint stucco, render, plaster, in-situ concrete and fibre cement

Note: Refer to the PDF flowchart for a visual of the steps below:

  1. Refer to appropriate preparation chart

  2. Is waterproofing an issue?

    1. If No:
      1. Apply 2 coats of Resene Sonyx 101 or Resene Lumbersider
      2. Alternatively, if the area is a small element of the house and there is no colour change - use the same waterborne system as the body of the house, such as Resene Hi-Glo
      3. Alternatively use Resene AquaShield for a classic Mediterranean look or Resene Sandtex Superfine
         
    2. If Yes:
      1. Apply 2 coats of Resene X-200

How to paint

Things to consider

Stucco, render, plaster, in-situ concrete and fibre cement


Textured Monotek sheets


Textured Monotek sheets

Key accessories essential to complete the job

Add-ons – to make the job easier or quicker

Return to index

 

Get inspired!  Sign up for our e-newsletter  |  Get saving!  Save with a Resene DIY Card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   – www.resene.com

View Videos

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.