Drama on the deck

Step 1:
Clear deck surface of items and sweep using a stiff brush.

Step 2:
Put on protective clothing. Dilute the Resene Timber and Deck Wash according to instructions and apply evenly to deck surface. Leave for 15 minutes before scrubbing with brush. Wash clean using ample water. Allow to dry.

Step 3:
Fill any cracks, nail or screw holes using an exterior timber filler. Allow to dry before sanding. Sweep deck clear of any dust or dirt.

Step 4:
Lay dropcloth. Paint deck rails and palings in complementary tones. We chose Resene Rivergum for the rails and posts and the lighter shade of Resene Pewter for the palings. Allow to dry and recoat as necessary.

Step 5:
Pour Resene Woodsman Decking Oil Stain into tray. Use the applicator to apply stain to 2-3 boards at a time, working the length of each board with even pressure. Apply two coats allowing dry time in between.

Step 6:
Wash the lambswool pad in warm soapy water to reuse. Dispose of paint water using an eco-friendly two bucket method.