Step 4: Apply topcoats using Resene colours of your choice. To finish: Using the L-brackets, fix the bottom box onto the wall. Screw the middle box to the bottom one, setting it about 150mm off the wall, then measure and fix the L-brackets to the wall for the top box. Step 1: Cut out the pieces for the box or have your supplier cut them for you. Assemble the boxes using 30mm screws. Step 2: Cut out 220mm squares for the entry and exit holes using a jig saw. Ours are set into the corner, 40mm from the edges. Lightly sand the edges of the holes. Step 3: Fill all of the screw holes, then undercoat the boxes using Resene Quick Dry primer undercoat. 1 2 3 4 www.reseneconstruction.co.nz 0800 50 70 40 Extend your choice and depth of colours like never before with CoolPlastTM & Resene CoolColour technology. After development and field testing, over the past 10 years, Resene Construction Systems are pleased to introduce the first CoolPlastTM coating system with our INTEGRA Lightweight Concrete, Graphex, Brick, Block and Masonry Plaster Facade Systems. Now you can select dark colours for your new Rockcote and Plaster Systems external plaster façade systems with confidence. Innovative Protection TM