b'step-by-step words and pictures: with thanks to Hirepoollaying pavingYoull need: base coarse, bedding sand, jointing sand,pavers, timber framing, 60kg and 40kg plate compactors, hand screed, Step 1 paving saw, extension lead, Dig out and frame the area to be paved,RCD life guard, shovel, to the depth of the combined paving, bedding sand and base coarse layers. Fillyard broom, trailer, builders with base coarse, compacting betweenlevel, wheelbarrowlayers where its deeper than 10cm. Step 2Compact the base coarse using the 60kg compactor. It should berm enough that the bedding sand will not be able tolter through. Step 3Pour on the sand and screed it to a uniform level, using temporary guides on each side to run your screed on. Dont compact the bedding sand itself.Step 4 Lay the full paversrst, starting from the straightest convenient edge. Leave 2mm-4mm between each paver to allow the jointing sand to penetrate around them.94 |'