b'pictures: Lucent* MediaTip: Instead of the Broadwall Surface Prep, you can use lining paper. Step 4Apply one or two coats of Resene Broadwall Surface Prep to the wall, using a PAL high solids roller sleeve, lay off with a dry roller several times until the coating is lightly textured and evenly distributed. This will give a light orange peel effect, which will help to hide surface imperfections. It can easily be sanded to achieve a smoothernish, if desired. If sanding, use a suitable dust mask to avoid irritation. There is no need to cut in to skirtings, corners and architraves with a brush. Sand, using 220-grit sandpaper.Step 5 In existing walls where movement over the years has resulted in failure of the wallboard joins,x the damage with mesh tape before proceeding. Fill any gaps between the skirting board and the wall lining with Selleys No More Gaps.Step 6 Apply Resene Sureseal pigmented sealer, to prevent stains from glue residue and aged wallboard discolouring the paint topcoats Lightly sand to remove any imperfections.Step 7 Apply the topcoats of your choice using the number 4 roller sleeve, selecting low-sheen options where possible, as they will help to hide any surface imperfections. Resene low sheen SpaceCote is an ideal choice for interiors.Tip: If the existing vinyl wallpaper is in good condition, simply seal it with Resene Vinyl Wallpaper Sealer and then topcoat. This will save you needing to strip the wallpaper and will make the decorating job easier.| 85'