b'pictures: Lucent* Media Step 4Measure and cut out two triangles from the leftover plywood for the roof ends, allowing a slight overhang at the sides. Nail them to the roof supports, which should be the same length as the kennel. Step 5Measure, mark and carefully cut out the corrugated iron using the tin snips, allowing an overhang front and back and at the sides to protect the kennel. Nail it to the timber roof structure using roo ng clouts.ReseneMid GreenStep 6 Fix the roof capping over the angle of the roo ng iron tonish the roof. Hinge the roof onto the dog kennel at the back. This allows it to be picked up to shakeReseneout bedding and clean the kennel. AlabasterStep 7 Prime then paint the kennel in your choice of Resene waterborne house paint. We used Resene Hi-Glo gloss acrylic, but you could also use the lower sheen Resene Sonyx 101 (semi-gloss) or Resene Lumbersider (satin).| 73'