b'step-by-step words: Rachel Macdonaldbuilding a dog kennelYoull need: plywood sheet, timber for supports, weatherboards or fence palings for cladding, skill saw, T-square, right angle, pencil and pen, tape measure, hammer and nails, roo ng clouts, corrugated iron, Step 1 tin snips, gloves, Measure the size of the plywood roof capping, hinges,kenneloor. In this kennel, the dog will enter from the side and turn at paintbrush, Reseneright angles into the sleeping space. primer, ReseneMark up the saw lines, making sure they are straight. Cut the base from Hi-Glo acrylic housethe board using the skill saw.and roof paint.Step 2 Nail two pieces of timber under theoor board to lift it off the ground so that it will stay dry. Measure corner supports to the appropriate height, cut them and nail them into theoor board. As we have the door in the side, we have added an additional post for the door frame.Step 3 Cut the weatherboards or fence palings to length and nail themto the supports.72 |'