Feedback
Resene Paints - home page

One to walk on - Resene Walk-on paving paint

Resene Walk-on is a satin general purpose flooring and paving paint.

Posted into What's New - July 2014...

Giving steps and porches a fresh coat of paint can do wonders for the overall look of your entranceway. Simply wash down the existing coating, remove any loose flaking material, prime or seal if needed and recoat using two coats of Resene Walk-on.

Resene Walk-on is a satin general purpose flooring and paving paint, based on tough acrylic resins to give maximum durability and abrasion resistance in a single pack finish. Ideal for use on steps, decking, concrete, porches, suitably primed timber, composite boards and interior floors.

Resene Walk-on colours are also available in Resene Uracryl where a high performance two pack system is preferred.

Consider using a Resene CoolColour™ version of the colour if you are applying a dark colour outside as it will help to reflect more heat than the normal version of the same colour.

See Data Sheet D322 for more technical information.

View the Resene Decks, Paths, Driveways and Recreational Areas chart for a taste of the colours you can get in Resene Walk-on.

Resene Walk-on replaces Resene Waterborne Sidewalk.

Available from Resene ColorShops and selected resellers.

 

Get inspired ! Subscribe      Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   – www.resene.com

View Videos

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.