Resene ProSelect Clean is a low VOC, environmentally friendly and biodegradable cleaner for use on Resene ProSelect coated floors. Safe to use and leaves a streak free finish. Specifically designed to be used with a micro-fibre spray mop. Available as ready to use or in a concentrate form.
|Active material:||Biodegradable non-ionic surfactant and degreaser|
|Dose Rate:||Mix 1 part Concentrate to 10 parts water (by volume)|
|VOC:||Concentrate: 25 g/L||Ready to Use: 2 g/L|
Mix 1 part Resene ProSelect Clean Concentrate to 10 parts water (by volume). For particularly dirty floors mix a stronger solution at 1 part Resene ProSelect Clean Concentrate to 5 parts water.
Simply vacuum or dry mop the floor to remove excess dirt, grit and dust.
Using a micro-fibre spray mop, spray/mist a small area of the floor and wipe in the direction of the grain. Allow to dry before walking on the clean surface. DO NOT wet mop the floor. For particularly stubborn dirty marks, spray directly onto the affected area and allow the cleaner to work several minutes before wiping off with a micro-fibre cleaning pad.
Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.
Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.
Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.
This is not a specification and all of the information is given in good faith. Since conditions of use are beyond the control of the manufacturer, information herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated, the manner of use is the sole responsibility of the user. The manufacturer does not assume any liability in connection with the use of the product relative to coverage, performance or injury.
30 August 2017
Can't find what you're looking for? Ask us!
We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email firstname.lastname@example.org and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.