Resene Paints - home page
Data Sheet PS07

Resene ProSelect Stain Base

Developed specifically for professional flooring contractors, Resene ProSelect Stain Base is a waterborne tint base designed to be coloured using the ProSelect Colour Concentrates. It is supplied in concentrated form and then thinned before use.

Physical properties

Material type: Oil modified urethane
Solvent: Water
Finish: Natural finish after thinning
Usual no. of coats: 1
VOC: 70 g/L
Volume Solids: 26 %
Cleanup: Water or soapy water

Typical uses

  • To stain/colour bare properly prepared timber
    • Hardwoods
    • Veneers
    • Cork


For use by experienced professional applicators only.

Add Resene ProSelect Colour Concentrate to achieve desired colour strength. Up to 10% Colour Concentrate is typical (do not add more than 20%). Shake or stir well until colour is even.

Dilute with an equal volume of water immediately before application and mix thoroughly.


Suitable for application by various methods such as brush, wipe, rag and mop. Apply a thin even coat and for best results work into the timber following the grain. Remove any excess before it dries. Drying time is dependent upon application conditions and porosity of the timber. Do not flood the timber surface.

Mix regularly while applying to ensure a uniform colour is maintained. Thinned product must be used the same day it is mixed.


Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.


Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.


Refer to or the Resene ProSelect Technical Data Booklet for more detailed information.

This is not a specification and all of the information is given in good faith. Since conditions of use are beyond the control of the manufacturer, information herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated, the manner of use is the sole responsibility of the user. The manufacturer does not assume any liability in connection with the use of the product relative to coverage, performance or injury.

30 August 2017

Resene Paints Ltd

Resene Paints Ltd   –

We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.

Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile, Quality Policy, Environmental Policy and Health & Safety Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

View Videos