Feedback
Data Sheet PS06

Resene ProSelect V-Hold

Developed specifically for professional flooring contractors, Resene ProSelect V-Hold provides resistance to runs and sags when applying ProSelect finishes to vertical surfaces such as stair risers, balustrades etc.

Physical properties

Material type: Polyurethane thickening additive
Solvent: Water
Finish: Suitable for use in all Resene ProSelect finishes.
Dose Rate: Up to 25 mL per Litre of Mixed Product
Usual no. of coats: Can be added at any stage to the mixed product.
Cleanup: Water or Soapy water

Typical uses

  • To help provide resistance to runs and sags when using Resene ProSelect on a vertical surface

Mixing

For use by experienced professional applicators only.

Add when required at any time during the pot life. Mechanical stir. Do not shake. Product will thicken after addition of V-Hold. DO NOT add more than the specified Dose Rate.

Dose Rate: Up to 25 mL per L of mixed product.

Clean up

Water or soapy water.

Application

Add into the mixed Resene ProSelect product and then apply with a high quality synthetic fibre brush or application pad.

Precautions

Consult the Safety Data Sheet and can labels for this product prior to use. Users should ensure that they are familiar with all aspects concerning safe use of the product. IF IN DOUBT DO NOT USE THIS PRODUCT.

Storage/Transport

Do not allow to freeze. Temperature during transport and or storage is required to be >5°C and <25°C.

Downloads

Refer to www.resene.com/proselect or the Resene ProSelect Technical Data Booklet for more detailed information.

Disclaimer
This is not a specification and all of the information is given in good faith. Since conditions of use are beyond the control of the manufacturer, information herein is without warranty, implied or otherwise, and final determination of the suitability of any information or material for the use contemplated, the manner of use is the sole responsibility of the user. The manufacturer does not assume any liability in connection with the use of the product relative to coverage, performance or injury.

15 August 2017

Resene Paints Ltd

Resene Paints Ltd   – www.resene.com

We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email update@resene.co.nz and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.

Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile and Environmental Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties.. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

View Videos