Close Give Feedback
Resene Paints - home page
Facebook Pinterest Instagram YouTube

Fence refresh

Give your garden a lift and prolong the life of your fence with a fresh coat of stain.

Fence before staining
Fence after staining
As seen in kiwigardener

You will need

Tools:

  • Garden sprayer
  • Hose with running water
  • Paintbrush or paint sprayer
  • Stiff-bristled brush

Did you know? 

Resene CoolColour looks like a normal colour but reflects more heat (rather than absorbing it) due to special pigment technology that improves substrate and paint durability. This cooling effect also occurs in plants with high chroma green leaves, which reflect heat because the chlorophyll pigment in the leaves absorbs the visible light needed for photosynthesis but reflects the infrared range, which helps keep the plant cool.

Instructions

How to refresh a fence:

How to refresh a fence - product usedProduct used
A close-up of the Resene Waterborne Woodsman CoolColourâ„¢ stain that was used to refresh this fence.


How to refresh a fence - Step 1 Step one
In the garden sprayer, mix one part Resene Moss & Mould Killer to five parts clean water. Spray and soak the wooden fence with the solution and leave on for 48 hours. Wear adequate safety protection.


How to refresh a fence - Step 2 Step two
Mix one part Resene Timber and Deck Wash to three parts clean water. Scrub the wooden fence thoroughly with the solution using a stiff-bristled brush, working in sections. Where possible, avoid contact with plants; however, if contact does occur, wash plants with copious quantities of freshwater as soon after contact as is practical.


How to refresh a fence - Step 3 Step three
Rinse well with clean water and allow the wooden fence to completely dry.


How to refresh a fence - Step 4 Step four
Cover nearby plants or surfaces as needed to protect them. Apply one coat of Resene Waterborne Woodsman CoolColour penetrating oil stain to the fence, and allow to dry. If using a paintbrush, brush in the direction of the grain. If using a sprayer, move slowly and steadily, keeping the sprayer parallel to the fence. We held a piece of cardboard behind the fence to stop the spray going over to the neighbouring property.


How to refresh a fence - Step 5 Step five
Apply a second coat of Resene Waterborne Woodsman CoolColour penetrating oil stain to the fence, and allow to dry.


How to refresh a fence - Refreshed fence Refreshed fence
A close-up of the refreshed fence.

Words and photos by Klaudia Krupa

 

Download a PDF of this project

View more projects

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Welcome to our World of Colour!™
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧