Mark Rayner shows you how to make this colourful hanging peg box from treated plywood.
You will need: 25mm galvanised jolt head nails, cardboard, drill with 10mm drill bit, hammer, jigsaw, offcuts of 9mm and 15mm treated plywood, paintbrush, pencil, PVA exterior glue, ruler, sandpaper, a saw and scissors. Resene Lustacryl tinted to Resene Elvis and Resene Quick Dry.
Mark two pieces of 15mm plywood measuring 300mm x 150mm and two pieces measuring 170mm x 150mm. Mark one piece of 9mm plywood measuring 300mm x 200mm. Cut the pieces of plywood using pencil lines as a guide.
Can't find what you're looking for? Ask us!
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.