Create this stylish shelf unit from reclaimed wood and finish it off with Resene Colorwood Whitewash.
Ways with wood with Mark Rayner – 62
Difficulty level: Moderate
You will need: 40mm panel pins, reclaimed bare wood (ours measured 20mm x 90mm), a clean cloth, drill with drill bits, hammer, paintbrush, pencil, PVA glue, sandpaper, saw, screwdriver, set square, shelf hangers with screws (x2) and a tape measure. Resene Colorwood Whitewash.
Other ideas: For a more natural finish, and to enhance the grain, apply three coats of Resene Aquaclear satin over the bare wood.
Can't find what you're looking for? Ask us!
We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email firstname.lastname@example.org and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.
Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile, Quality Policy, Environmental Policy and Health & Safety Policy.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.