[an error occurred while processing this directive]

Resene primers, sealers and undercoats

- click to print this section
 
Resene Acrylic Undercoat

Resene Acrylic Undercoat
general purpose undercoat - exterior/interior - waterborne
Environmental Choice approved

Resene Acrylic Undercoat is an easy brushing, quick, hard drying undercoat with exceptional flow and sanding characteristics. While specifically designed for maximum benefit under acrylic enamels, such as Resene Enamacryl and Resene Lustacryl, Resene Acrylic Undercoat tinted to the correct colour is ideal for use under a wide range of waterborne and solventborne topcoats to improve the hiding of the paint system. See Data Sheet D404 for technical information.

Typical uses: All exterior and interior prepared surfaces, block and brickwork, cement plasters, cloth and woven wallcoverings, fibre and particle board, furniture, paperfaced plasterboard (GIB®, Gyprock®), repaint old work, timber (including Matai, Spotted Gum and Totara), wallboards, wallpaper.

Resene Aluminium Wood Primer

Resene Aluminium Wood Primer
aluminium wood primer – exterior - solventborne
Resene Aluminium Wood Primer is a lead and extender free primer based on mixed oil and oil-modified alkyds. Its sole pigmentation is aluminium flake. See Data Sheet D46 for technical information.

Typical uses: Resene Aluminium Wood Primer may be used in any area in which conventional wood primers are used. Typically, however, it is used in more difficult areas where surface preparation cannot be of a high standard; knots exist in the timber; or staining is a major problem. While it is not offered as a cure-all, its performance in these areas is often much better than conventional primers.

Resene Broadwall Waterborne Wallboard Sealer

Resene Broadwall Waterborne Wallboard Sealer
waterborne wallboard sealer – interior - waterborne
Environmental Choice approved

Resene Broadwall Waterborne Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings. Designed to minimise porosity and textural differences. VOC free. See Data Sheet D403 for technical information.

Typical uses: Air-dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard (GIB®, Gyprock®).

Resene Concrete Primer

Resene Concrete Primer
concrete primer – exterior/interior - waterborne

Environmental Choice approved
Resene Concrete Primer is designed for cementitious surfaces, including all concrete, plaster and surfaces, such as fibre cement to make ready for topcoating. Provides long-term adhesion coupled with exceptional durability even when left uncoated for prolonged periods. See Data Sheet D405 for technical information.

Typical uses: Brick and blockwork, cementitious surfaces, fibre cement, formed concrete, plaster, precast panels, tilt slab.

Resene ConcreteSeal 3 in 1

Resene ConcreteSeal 3 in 1
fast drying concrete primer/sealer – exterior/interior - solventborne
Resene ConcreteSeal 3 in 1 is a versatile fast drying primer/sealer for concrete that may also be used as a coloured dust coat for new and aged interior concrete floors. See Data Sheet D409.

Typical uses: Concrete, concrete floors, dust coat for interior concrete floors, tilt slab.

Resene Enamel Undercoat

Resene Enamel Undercoat
general purpose undercoat - exterior/interior - solventborne
Resene Enamel Undercoat is a blend of special alkyd resins balanced with unique pigments. An easy brushing, quick, hard drying undercoat with exceptional flow and sanding properties. See Data Sheet D44 for technical information.

Typical uses: All exterior and interior prepared surfaces, architraves, bathrooms, fibre and particle board, furniture, kitchens, laundries, paperfaced plasterboard (GIB®, Gyprock®), skirtings, suitably primed metals, timber doors, wallboards, weatherboards.

Resene Galvo One

Resene Galvo One
galvanised steel primer - exterior - solventborne
Resene Galvo One is a single pack primer based on alkyd resins and special anti-corrosive pigments. Specially developed for direct application to new and weathered galvanised steel. Effectively welds itself to galvanised steel and stops zinc corrosion. Also suitable for use on Zincalume. See Data Sheet D41 for technical information.

Typical uses: Downpipes, flashings, galvanised steel, gutters, long run and corrugated iron, roofs, zincalume.

Resene Galvo-Prime

Resene Galvo-Prime
galvanised steel primer - exterior - waterborne
Resene Galvo-Prime is a water reducible primer that matches its solvent reducible analogues even in marine exposures. See Data Sheet D402 for technical information.

Typical uses: All exterior galvanised steel, non-ferrous metals, roofs, zincalume.

Resene GP Metal Primer

Resene GP Metal Primer
general purpose metal primer – exterior/interior - solventborne
Resene GP Metal Primer is an all-purpose high build primer for metals. Based on a non saponifiable resin and a blend of anti-corrosive pigments. Specially developed for priming a range of new and weathered metals. See Data Sheet D411 for technical information.

Typical uses: Aluminium, galvanising, repaints, steel, zincalume.

Resene HydraBlock

Resene HydraBlock
waterborne - epoxy barrier

Resene HydraBlock is a transparent two pack low VOC waterborne epoxy barrier coating for application to cementitious surfaces subject to hydrostatic pressure. It has excellent adhesion and is tolerant of application over damp surfaces. Controls rising damp and efflorescence.

Typical uses: Masonry – walls, in-situ concrete – walls/floors and plastered walls.

New product – coming soon!

Resene Membrane Roofing Primer

Resene Membrane Roofing Primer
exterior - waterborne
Environmental Choice approved

Resene Membrane Roofing Primer is a specially formulated pre-treatment to upgrade adhesion, both wet and dry, to rubber membrane sheeting materials. See Data Sheet D49 for technical information.

Typical uses: Asphalt tennis courts, bituminous substrates, EPDM and butyl rubber membrane sheeting.

Resene Particle Board Sealer

Resene Particle Board Sealer
clear particle board sealer – interior - waterborne
Resene Particle Board Sealer is a unique product designed for use under clear alkyd and polyurethane varnishes. Seals in all fibres and waxes used in the manufacture of particle, fibre, chip and strandboard. See Data Sheet D43 for technical information.

Typical uses: Where a solventborne or polyurethane finish is required over HDF and MDF.

Resene Quick Dry

Resene Quick Dry
waterborne primer undercoat - exterior/interior - waterborne
Environmental Choice approved

Resene Quick Dry Waterborne Primer Undercoat provides long-term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. The latest formulation has enhanced flow and sanding characteristics for maximum benefit under waterborne enamels, such as Resene Enamacryl and Resene Lustacryl. See Data Sheet D45 for technical information.

Typical uses: Architraves, block and brickwork, cement plaster, cloth and woven wallcoverings, particle board, repaint old work, timber (including Matai, Spotted Gum and Totara), wallboards, wallpaper.

Resene Sureseal

Resene Sureseal
penetrating pigmented sealer - exterior/interior - solventborne
Resene Sureseal is a pigmented, solventborne, alkali-resistant, penetrating sealer with the ability to penetrate and bond old decaying surfaces and make them suitable for painting. This lower odour formulation acts as a surface conditioner that also reduces bleeding of water stains and dries without the unwanted and strong solvent odours associated with traditional solventborne products. See Data Sheet D42 for technical information.

Typical uses: Brickwork, chalky and powdery surfaces, concrete tiles, fibre cement, fibrous plaster, paperfaced plasterboard (GIB®, Gyprock®), plaster – gypsum and solid, plaster glass, stucco, timber.

Resene terracotta Sealer

Resene Terracotta Sealer
clear water repellent treatment for terracotta – exterior/interior - waterborne
Environmental Choice approved

Resene Terracotta Sealer is a clear water repellent treatment formulated to help control efflorescence and give a long-term waterbeading effect to deter water penetration. Use on its own or as a primer under waterborne coatings. See Data Sheet D410 for technical information.

Typical uses: Terracotta.

Resene Vinyl Wallpaper Sealer

Resene Vinyl Wallpaper Sealer
vinyl wallpaper sealer – interior - solventborne
Resene Vinyl Wallpaper Sealer is formulated to seal in the plasticiser found in vinyl wallpapers. Vinyl wallpaper coated directly with standard paint finishes can become sticky as the plasticiser in the wallpaper migrates through the paint finish affecting its cure. See Data Sheet D406 for technical information.

Typical uses: Wallpaper.

Resene Waterborne Smooth Surface Sealer

Resene Waterborne Smooth Surface Sealer
adhesion primer - exterior/interior - waterborne
Resene Waterborne Smooth Surface Sealer has been tailored to be a waterborne 'adhesive primer' over a series of surfaces usually considered difficult to coat or in need of expensive pre-treatment. Fast drying, easy application and wide compatibility with topcoats are added features of this product. See Data Sheet D47a for technical information.

Typical uses: As a pre-treatment on aluminium, baked enamels, copper and its alloys, glass and ceramics, laminated surfaces, melamine, most glazed surfaces, old varnished surfaces.

Resene Wintergrade Quick Dry

Resene Wintergrade Quick Dry
low temperature curing waterborne primer undercoat – exterior/interior - waterborne
Environmental Choice approved
Resene Wintergrade Quick Dry waterborne primer undercoat is designed to cure at  low temperatures down to 2°C. It provides long term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. See Data Sheet D45a for technical information.

Typical uses: Architraves, block and brickwork, cement plaster, HDF and MDF, cloth and woven wallcoverings, fibre and particle board, repaint old work, timber (including Matai, Spotted Gum, Totara), wallboards, wallpaper.

Resene Wintergrade Roof Primer

Resene Wintergrade Roof Primer
low temperature curing waterborne roof primer – exterior - waterborne
Environmental Choice approved
Resene Wintergrade Roof Primer is designed to cure at very low temperatures down to 2°C. Ideal for use under Resene waterborne roof topcoats. See Data Sheet D407 for technical information.

Typical uses: Suitably prepared new or corrosion free galvanised steel or Zincalume.

Resene Wood Primer

Resene Wood Primer
general purpose wood primer - exterior - solventborne
Resene Wood Primer is based on an oil-modified alkyd resin blended with pigments to give ease of application and good penetration to substrates. Flexible and produces the ideal surface for subsequent paint finishes. See Data Sheet D40 for technical information.

Typical uses: Doors, outdoor furniture, timber, weatherboards, window frames.

 

Return to product lists