Feedback

Flat-tering finish

Posted into What's New - Feb 2017...

Resene CyberCote - flat waterborne paint - interior - spray application

Need a super flat finish that you can use for a consistent finish from wall to ceiling without the painter having to stop to change product halfway? New Resene CyberCote is designed to produce a tough interior flat finish on broadwall and ceiling areas. Simply choose your Resene colour, then get spraying.

Resene CyberCote is designed to be applied using an airless spray unit with a minimum flow rate of 2 litres per minute, a FFT 414 and fitted with a 60 mesh filter, before back rolling with a Resene No.1 or microfibre hybrid roller sleeve to complete the finish.

Resene CyberCote is ideal for new residential housing and commercial projects where one colour is being used throughout, the scotias are square stopped and spray application is planned.

Use Resene Lustacryl semi-gloss on trim and joinery to complete interior spaces and Resene SpaceCote Kitchen & Bathroom in wet areas.

See data sheet D323 on the Resene website or view the product label online.

This product was formerly known as Cybercoat.

Follow
View Videos
 

Resene Paints Ltd

Choose your Resene paint colours

Our vision is to be respected as an ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile and Environmental Policy.

Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.

We would love to hear from you if you wish to use Resene’s images, information and ideas for social medial, blogs, newsletters and other media use. Please email update@resene.co.nz and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

Australia:
PO Box 924, Beenleigh, Queensland 4207
P: 1800 738 383. F: 1800 064 960
advice@resene.com.au
www.resene.com.au

New Zealand:
PO Box 38242, Wellington Mail Centre, Lower Hutt 5045
P: +64 (4) 577 0500, 0800 RESENE (737 363). F: (04) 577 0600
advice@resene.co.nz
www.resene.co.nz