Systems in which SPs have been successfully used include: epoxy polyamine, polyamide and carboxy systems, polyester urethane, acrylic urethane, moisture cured urethane, aspartic ester urethanes, long medium and short oil alkyds, oxazolidone urethane, NC lacquers, acid catalysed alkyds, solventborne acrylics and vinyls, chlorinated rubber and chlorinated polyolefins.
As these solvent pastes are mainly designed for heavy duty, high build and high solid coatings, we recommend high shear incorporation for optimum performance.
While SPs have been designed to achieve the broadest degree of compatibility, idiosyncrasies within any formulation can affect compatibility. We have long experience in recognising the causes of such problems and are able to help formulate around any issues that may arise.
The dispersing resins used are durable and inert, and generally will not detract from the paint properties. However, at use levels of greater than 10% by volume or in critical systems, solvent / chemical resistance testing would be appropriate.
Colour formulation data bases established with SPs can also be utilized with other Resene Total Colour Pastes.
| Mass Tone | 1:5 TiO2 | |
|---|---|---|
| Tinter SPA |  |
 |
| Tinter SPB |  |
 |
| Tinter SPC |  |
 |
| Tinter SPD |  |
 |
| Tinter SPE |  |
 |
| Tinter SPF |  |
 |
| Tinter SPG |  |
 |
| Tinter SPH |  |
 |
| Tinter SPJ |  |
 |
| Tinter SPK |  |
 |
| Tinter SPL |  |
 |
| Tinter SPM |  |
 |
| Tinter SPP |  |
 |
| Resistance to bleed in | Light Fastness | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product | Pigment | Density gm/cc | Total Solids % | Pigment Solids % | Alkali | Acids | Butyl Acetate | Xylene | Mass Tone | Tint 1:25 | ||
| Tinter SP A | Pigment Yellow 120 | 1.18 | 68 | 45 | 5 | 5 | 4-5 | 4-5 | 8 | 7 | ||
| Tinter SP B | Pigment Black 7 | 1.14 | 58 | 24 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP C | Pigment Yellow 42 | 1.86 | 73 | 62 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP D | Pigment Green 7 | 1.10 | 49 | 25 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP E | Pigment Blue 15.3 | 1.12 | 50 | 27 | 5 | 5 | 5 | 5 | 8 | 7 | ||
| Tinter SP F | Pigment Red 101 | 2.21 | 81 | 67 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP G | Pigment Orange 73 | 1.04 | 51 | 42 | 5 | 5 | 2-3 | 4-5 | 8 | 8 | ||
| Tinter SP H | Pigment Red 254 | 1.19 | 64 | 45 | 5 | 5 | 5 | 4-5 | 8 | 8 | ||
| Tinter SP I | Pigment White 6 | 2.05 | 82 | 69 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP J | Pigment Violet 23 | 1.04 | 35 | 19 | 5 | 5 | 5 | 4-5 | 8 | 7 | ||
| Tinter SP K | Pigment Green 17 | 2.26 | 81 | 70 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP L | Blend | 1.23 | 66 | 23 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| Tinter SP M | Pigment Red 122 | 1.00 | 30 | 15 | 5 | 5 | 5 | 5 | 7-8 | 7 | ||
| Tinter SP P | Pigment Yellow 184 | 2.06 | 77 | 59 | 5 | 4-5 | 5 | 5 | 8 | 8 | ||
Resene Total Colour Solvent Pastes for Industrial Coatings - Low shear incorporation
Resene Total Colour Solvent Pastes for Industrial Coatings- low shear incorporation are a range of pigments dispersed into dispersant/dispersing resin/solvent. The dispersing resins used are inert and generally will not detract from the paint properties. At levels greater than 10% by volume or in critical systems, solvent/chemical resistance testing of the tinted colour is recommended.
Each system has been optimised to the surface demands of each pigment, while Resene Solvent Pastes low shear incorporation have been developed to achieve the broadest possible degree of compatibility as formulation components can affect compatibility, which must be tested for each system.
Systems in which Resene Solvent Pastes low shear incorporation have been successfully used include epoxy polyamine, polyamide, carboxy, polyester urethane, acrylic polyurethane, moisture cured polyurethane, aspartic ester urethane, alkyds of varying oil length, oxazolidone urethane, NC lacquers, acid catalysed alkyds, solventborne acrylics and vinyls, chlorinated rubber and chlorinated polyolefins.
| Mass Tone | 1:20 TiO2 | |
|---|---|---|
| LSSP - PG | ||
| LSSP - GB | ||
| LSSP - PB | ||
| LSSP - EP | ||
| LSSP - YO | ||
| LSSP - HY | ||
| LSSP - TY | ||
| LSSP - RO | ||
| LSSP - DR | ||
| LSSP - LB | ||
| LSSP - TW | ||
| LSSP - MO | ||
| LSSP - QR | ||
| LSSP - QV | ||
| LSSP - CV | ||
| LSSP - BU |
| Resistance to bleed in | Light Fastness | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Product | Pigment | Density gm/cc | Total Solids % | Pigment Solids % | Alkali | Acids | Butyl Acetate | Xylene | Mass Tone | Tint 1:25 | ||
| LSSP - PG | Pigment Green 7 | 1.12 | 51.2 | 19.2 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - GB | Pigment Blue 15.3 | 1.1 | 54.9 | 22.2 | 5 | 5 | 5 | 5 | 8 | 7-8 | ||
| LSSP - PB | Pigment Blue 15.2 | 1.1 | 57.4 | 16.4 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - EP | Pigment Blue 15.6 | 1.1 | 46.6 | 25.1 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - YO | Pigment Yellow 42 | 1.58 | 72.6 | 48.5 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - HY | Pigment Yellow 184 | 1.78 | 72.2 | 48.8 | 5 | 4-5 | 5 | 5 | 8 | 8 | ||
| LSSP - TY | Pigment Blend | 1.42 | 67.7 | 45.8 | 5 | 5 | 4-5 | 4-5 | 8 | 7-8 | ||
| LSSP - RO | Pigment Red 101 | 2.01 | 74.8 | 63.6 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - DR | Pigment Red 255 | 1.12 | 51.9 | 40.7 | 5 | 5 | 5 | 5 | 8 | 7-8 | ||
| LSSP - LB | Pigment Black 7 | 1.13 | 57.8 | 22.6 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - TW | Pigment White 6 | 1.97 | 82.7 | 64.4 | 5 | 5 | 5 | 5 | 8 | 8 | ||
| LSSP - MO | Pigment Orange 73 | 1.08 | 54.8 | 29.7 | 5 | 5 | 5 | 5 | 8 | 7-8 | ||
| LSSP - QR | Pigment Violet 19 | 1.05 | 53.4 | 18 | 5 | 5 | 5 | 5 | 8 | 7-8 | ||
| LSSP - QV | Pigment Violet 19 | 1.06 | 48.7 | 16.5 | 5 | 5 | 5 | 5 | 8 | 7-8 | ||
| LSSP - CV | Pigment Violet 23 | 1.03 | 64.4 | 5.6 | 5 | 5 | 5 | 5 | 8 | 7-8 | ||
| LSSP - BU | Pigment Brown 7 | 1.58 | 71.2 | 51.3 | 5 | 5 | 5 | 5 | 8 | 8 | ||
