Mark Rayner makes a bulb planter from a wooden box.
You will need: A wooden crate or box, four small terracotta pots, exterior PVA glue, drill with 10mm drill bit, paintbrush good quality bulb potting mix and spring bulbs, Resene Quick Dry, Resene Sandtex mediterranean effect, Resene Terracotta Sealer and Testpots of Resene Wild Thing and Resene Limerick.
Apply one coat of Resene Quick Dry to the inside and outside of the entire box and allow two hours to dry.
Apply one coat of Resene Sandtex to the out-side of the feet and box, dabbing the paint on to create a textured surface. Allow to dry.
Paint the feet with two coats of Resene Limerick. As with other paint in this project, allow two hours for each coat to dry.
Paint the inside of the box with two coats of Resene Limerick, again allowing two hours for each coat to dry.
Can't find what you're looking for? Ask us!
We would love to hear from you if you wish to use Resene’s images, information and ideas for social medial, blogs, newsletters and other media use. Please email email@example.com and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.